[WT-support] UDP error 10013

[Martin]

Hi Larry,
Thanks for quick answer.
Netstat shows no application using port 9871 before I start WT.
After starting WT, I see only wtDxTelnet using this port (0.0.0.0:9871)
There is the Messagebox with Error 10013 and
WT shows in the last line:
Ethernet: Error sending UDP protocal #10038

I also tried an other port with the same Result.

Any suggestions?
thanks,
Martin OE1ILW


Laurent HAAS - F6FVY schrieb:
> Hi Martin et al.
>
> Martin a écrit :
>
>   
>> I have problems to get my DxCluster running in WT.
>> wtDxTelnet connects well to a DxCluster via LAN,
>> (BroadcastIpAdress: 192.168.200.255, Port: 9871
>> LAN: 192.168.200.X SN: 255.255.255.0)
>> WT Ethernet: 192.168.200.255 Port 9871
>> No firewall running.
>>
>> When WT (3.14) starts I get the Message:
>> Error opening UDP socket #10013
>>
>> What's wrong?
>>     
>
> Most likely, this error code is returned when another application (or 
> process) uses the same port and is blocking it.
>
> Please read
>
> http://www.f5mzn.org/pipermail/support/2007-January/072932.html
>
> for further info
>
> 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070801/4173c0e0/attachment.htm