[WT-support] CW MESSAGES

[Don Beattie]

Further to the note I sent earlier (below) I now have isolated what causes this problem.

If I select CW from the LPT port, there is no problem

If I select WinKey and attach a V.10 WinKey, the problem appears.

Does anyone know why this is happening ?

73

Don, G3BJ

  ----- Original Message ----- 
  From: Don Beattie 
  To: support at win-test.com 
  Sent: Tuesday, October 31, 2006 3:44 PM
  Subject: CW MESSAGES


  I have a strange problem here. I am running 3.5.0 on two computers, and am preparing for CQWW CW.

  On one computer, everything is fine. On the second, I have an odd effect when I use the "+" key to send TU etc. IN EVERY case, it sends the other callsign followed by the rest of the exchange. I expect it to do this when I have changed the call, but not when there is no change. The message in "+" is $CORRECT TU $MYCALL $CR. I have looked for a setting that could cause this problem,  but cannot find anything. Does anyone know what causes this problem ?

  73

  Don, G3BJ (and G5W) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20061031/37933ba8/attachment.html