[WT-support] Alt-F4 => Split Frequency

[Tõnno Vähk]

Hi,

yes, this ALT-F4 was the biggest problem in CQWW. I have automatic band switching on amp based on TX frequency and it takes some 5 seconds for the change so every time I used ALT-F4 I lost some time as the TX went to some other band... With MP it is a problem as I also can't use the RESTORE-RECALL sequence because it freezes the CAT.

I hope you can fix the ALT-F4 shortly. Everything else worked great for 48 hours and 5k QSOs, WT is really fun to operate with, thanks guys!

BTW, I also noticed that with last version when you open WT then it starts minimized and you have to maximize the window to see the program - that is also a small bug I guess.

73
Tonno
ES5TV

-----Original Message-----
From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On Behalf Of Thomas Koglin, DL5LYM
Sent: Saturday, October 28, 2006 12:23 PM
To: support at win-test.com
Subject: Re: [WT-support] Alt-F4 => Split Frequency

Hello
noticed similar problem in WAG with WT3.4.5 / FT1000Mk5. After pressing
ALT-F4 TRX was in Spilt mode and the band on main VFO was not the same like indicated in Wintest. No chance to match by pressing ALT-F1/F2 or bandswitches on radio. But this mismatch could be solved by clicking on any station in ALT-A Window. Afterwards everything worked ok again (except loosing the running frequency during this time hihi).

73
Tom, DL5LYM





----- Original Message -----
From: "Bernhard Buettner DL6RAI" <wintest at dl6rai.muc.de>
To: "Win-Test Support List" <support at win-test.com>
Sent: Sunday, October 22, 2006 8:32 PM
Subject: [WT-support] Alt-F4 => Split Frequency


> Dear Win-Test users:
>
> We used WT 3.4.5 during WAG this weekend and everything worked pretty
> well.  However, it was noticed that whenever we wanted to return to
> our run frequency (Alt-F4) after clicking on a mult, the radio would
> go into split frequency mode. VFO A would be on the correct frequency,
> but VFO B was completely off, sometimes even on another band.
>
> We used two Kenwood TS-850SATs with radio control and the behaviour
> was identical on both. DJ3WE (Icom IC-781) reported the same problem.
>
> Anyone else noticed that problem?
>
> Congrats on 3.5.0!
>
> 73 Ben, DL6RAI
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> 


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support