[WT-support] Alt-F4 => Split Frequency

[Thomas Koglin, DL5LYM]

Hello
noticed similar problem in WAG with WT3.4.5 / FT1000Mk5. After pressing 
ALT-F4 TRX was in Spilt mode and the band on main VFO was not the same like 
indicated in Wintest. No chance to match by pressing ALT-F1/F2 or 
bandswitches on radio. But this mismatch could be solved by clicking on any 
station in ALT-A Window. Afterwards everything worked ok again (except 
loosing the running frequency during this time hihi).

73
Tom, DL5LYM





----- Original Message ----- 
From: "Bernhard Buettner DL6RAI" <wintest at dl6rai.muc.de>
To: "Win-Test Support List" <support at win-test.com>
Sent: Sunday, October 22, 2006 8:32 PM
Subject: [WT-support] Alt-F4 => Split Frequency


> Dear Win-Test users:
>
> We used WT 3.4.5 during WAG this weekend and everything worked pretty
> well.  However, it was noticed that whenever we wanted to return to
> our run frequency (Alt-F4) after clicking on a mult, the radio would
> go into split frequency mode. VFO A would be on the correct frequency,
> but VFO B was completely off, sometimes even on another band.
>
> We used two Kenwood TS-850SATs with radio control and the behaviour
> was identical on both. DJ3WE (Icom IC-781) reported the same problem.
>
> Anyone else noticed that problem?
>
> Congrats on 3.5.0!
>
> 73 Ben, DL6RAI
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>