[WT-support] LPT Bug(s)?

[Gavin Taylor]

Hi
 
I can also confirm what Marios described below. Pin 4 is stuck on after
pressing ALTGr+T.
 
Pin 5 stereo is not working, but Pin 9 is fine. I had previously reported
that pin 9 was not working, but that was a problem at my end. I had changed
my motherboard and the LPT voltages would no longer drive the circuit. I
have fixed that and it is now working correctly, sorry for the incorrect
report.
 
If you were to provide a latch Pin, pin 7 would be better as this would
still allow a standard external DVK to be used. It also would be great if
the functionality of pin 4 (headphone control) could be duplicated on pin 8,
again allowing a standard external DVK to be used. Just as for Stereo RX
Audio where you can select either pin 5 or pin 9.
 
Good luck from FY!
 
73 Gavin
GM0GAV
 

  _____  

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Marios Nicolaou
Sent: 22 October 2006 22:44
To: support at win-test.com
Subject: [WT-support] LPT Bug(s)?


Hi all 

I am trying to modify my SO2R box so I can try the advanced SO2R

I came across a bug in  3.5.0 regarding the headphone toggle ALTGr+T but
using pin-4 of LPT.

Pin-4  (Headphone Control enabled): 
         ALTGr+T pressed once:   3V on pin 4 (as expected) 
         ALTGr+T pressed again to toggle to off:   STILL 3V on pin4  [all
controls in the menu show  that this is off)
         Only way to turn the voltage off form pin 4 is to press ALTGr+A

Other LPT bugs: 

Pin-5 used as Stereo Rx Audio (ie headphone split)
                It doesnt work! No voltage change when ALTGr+S is pressed
(DVK is disabled)
                When pin 9 is chosen instead then ALTGr+S works OK 

Is there a way you could allow the LATCH command to work on the LPT also +
enable it in the menus? eg Pin 6 [so you either use pin 6 for DVK or for
LATCH).

Thanks again and GL in FY

73s 
Marios
5B4WN/G0WWW


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20061023/931ef5fc/attachment.html