[WT-support] SO2R

[Filipe Lopes]

Hi Larry,

and you think it will work for WX0B box?

73's Filipe


----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Thursday, November 23, 2006 9:25 PM
Subject: Re: [WT-support] SO2R


> Hi Filipe
>
> Filipe Lopes a écrit :
>
>> I am home from University and I bought a USB to Paralel adapter for WX0B 
>> box.
>>
>> I connected the USB adapter to laptop and WIN XP recognized it and 
>> installed it, but once I try the box it doesnt do anything, the HEX code 
>> on WT configuration in 378 is that correct?
>> I then tryed to connect a cw interface and it doesnt work either.
>
> Mmmmm... USB to parallel converters are usually designed to drive printers 
> only. It is very unlikely that they act like "real" parallel ports.
>
> The 378 hex address is the IRQ address of the standard (well, most of the 
> time) of the LPT1 port. Maybe you could check (if it is displayed 
> somewhere...) this address.
>
> Another solution would be to use an USB to serial interface (which are 
> more "compatible") and use the CW and PTT output of the emulated serial 
> port.
>
> 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.14.7/538 - Release Date: 18-11-2006
>
>