AW: [WT-support] wtDX Telenet status update?

[Peter]

Hi All!

Its not related to the cluster connection.
Commands direct in wtdx telnet  works good.
But command via alt-t on the same pc doesn't received by wtdx telnet and 
thus not send to the cluster.

But will do tests and try to give feedback later

Peter
Carsten Esch schreef:
> ... in fact we at DF0CG might have used the same cluster as PI4CC so it
> might be cluster related?
>
> Otherwise Tim (K3LR) probably used another one but me it is related to a
> cluster software than?
>
> 73sss
>
> Carsten, DL6LAU
>
> -----Ursprüngliche Nachricht-----
> Von: support-bounces at win-test.com [mailto:support-bounces at win-test.com] Im
> Auftrag von 9K2HN
> Gesendet: Freitag, 10. November 2006 10:23
> An: support at win-test.com
> Betreff: RE: [WT-support] wtDX Telenet status update?
>
> I did report the same problem also last year after CQWW CW, I think if
> you used different cluster the problem will be solved. try to use AD1C
> it was working for me for more than 30h out of the 48h in the last
> contest.
>
> de 9k2hn
> Hamad
>
>   
>> -------- Original Message --------
>> Subject: Re: [WT-support] wtDX Telenet status update?
>> From: Olivier F5MZN <olecam at f5mzn.org>
>> Date: Fri, November 10, 2006 12:17 am
>> To: support at win-test.com
>>
>> Hello Peter,
>>
>>     
>>> As said before at PI4CC we have similar problems with DXtelnet.
>>>
>>> This evening I installed  a fresh win-test 3.5.0 at home on a second
>>> computer with xp-prof and wtdxtelnet 2.0
>>> On that computer I have loaded the cqwwssb contest with 1902 qso's
>>> Make the connection with the  dx-cluster and see spots coming in
>>>
>>> Run down to the livingroom and update the win-test 3.3 version to 3.5.0
>>> Start wintest and try to reach the cluster via win-test and its get
>>>       
> spots
>   
>>> Then I mark out disable log sychronization I got the full log from the
>>> other PC
>>>
>>> Got the 1902 qso's and guess..... no commands can't send anymore to the
>>> cluster.
>>> Spots still roling in.
>>>
>>> When back to the pc with wtdxtelnet and via alt-t there in NO commands
>>> sening out. A command direct into wtdxtelnet  gives an output.
>>>
>>> So just  (un)lucky?
>>>       
>> Sadly yes, probably! :( I have tried to repeat exactly the same
>> configuration here several time with our CQWW log (>8000 Qs) and I still
>> have access to the cluster.
>>
>> If you still have your setup ready, can you try to start a second
>> wtDxTelnet instance? Don't connect to anywhere, just try to send
>> anything from WT (Alt+T): you should get a "Syntax error" back from the
>> second instance. You can then close the second wtDxTelnet.
>>
>> You can also try to disconnect the cluster on the first instance, then
>> try to send anything in ALT+T again and see if you receive back a
>> "syntax error". I guess you should not...
>>
>> I have no further test to suggest for now. Are you able to repeat the
>> problem several time?
>>
>> Many thanks!
>>
>> 73,
>> --
>> Olivier / f5mzn
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>     
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
>