[WT-support] Re: radio control with Kenwoods

[W2RU - Bud Hippisley]

cx6vm.jorge at adinet.com.uy wrote:

>Using it with Kenwook TS450S.
>I have it as 4800, 8, none, 1, always on, always on
>
Older Kenwoods need 4800, 8, N, 2.  Newer Kenwoods can use 4800, 8, N, 
1.  Check to make sure your TS450S is OK using 1 stop bit; if it really 
needs two stop bits, you may get erratic signalling on the COM port.

Bud, W2RU