[WT-support] Notes after CQWW SSB

[HRS I4UFH]

I had checked , and really the DVK PTT is wired with the command, so with
Foot switch ON the Ptt is not released after ending Memory because it's
think that the footswitch is still  pressed !!

Thank's for the report !

I will be fixed in next firmware release !!

73 Fabio I4UFH


----- Original Message -----
From: "Olivier F5MZN" <olecam at f5mzn.org>
To: <support at win-test.com>
Sent: Sunday, November 05, 2006 9:28 PM
Subject: Re: [WT-support] Notes after CQWW SSB


> HRS I4UFH wrote:
> > Hi Toni and fellows
> >
> >>> - With EZM if I have footswich (PTT) turned on and I press some
> >>> F-key memory, PTT will stuck on. It'll release while using footswich
> >>> again. This happends for example in cases if I come back to some
> >>> station and want to send 5914 message with INS key.
> >
> >> Waiting for Fabio's comments on this.
> >
> >
> > This is a feature even a problem, the problem is that WT send the PTT
> > command even the FootSwitch is pressed. I think it could be avoided
simply
> > checking if the footswich is pressed or not and don't sending PTT comman
>
> WT does not send PTT in any of these cases. The footswitch is connected
> to the EZMaster, and the Voice Keyer is build in.
>
> I don't have my EZMaster under hand to confirm what Toni reported but I
> remember that I have been annoyed during various SBB contests when using
> the EZM Voice Keyer with the footswitch ON.
>
> IMHO, both *must* be independant (output must be like a logic OR between
> both PTTs).
>
> 73,
> --
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>