[WT-support] No CW going to Radio B

[Olivier F5MZN]

Hi -

>  
> I have a strange problem and nothing seems to help.
>  
> Using 2xMP and EZMaster and WT in Advanced SO2R mode.
>  
> All the CW messages that I send go to A radio. Also when Active Radio is 
> B and also when I use SHIFT (SHIFT for binding is enabled).
>  
> When I have Active Radio A and press SHIFT+F1 for example then for a 
> half a second Active Radio changes to B (led flashes on EZM) but then 
> goes back to A and message starts on A.
>  
> When the Active Radio is B and I send message it goes straight to Radio A.
> After message is completed WT shows that Active Radio is B but EZM shows A.
>  
> No change of WT version or restarting computer/EZM seems to help. Also 
> the same happens in simple SO2R mode using empty scenario does not help.
>  
> This all happens when WinKey is disabled. Now when I enable WK then the 
> problem is fixed and messages go to Radio B when they are supposed to go 
> there.
>  
> And also very strange is that with SSB messages there is no problem - 
> they go to B radio always when supposed to.
>  
> Can anybody help?

Have you got the last available firmware in your EZM?

Have you tried either with or without WinKey?

73 de Olivier / f5mzn
-- 
A: Because it messes up the order in which people normally read text.
Q: Why is it such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?