[WT-support] Type ahead window

George geo at KeoBeer.com
Thu Jun 15 15:55:29 CEST 2006


Yes I can confirm that the problem is certainly the W5XD multikeyer.
I have disconnected this now and gone over to an LPT interface for CW and
the problem is solved.
Even at 40 wpm it is working fine.
That means I use two ports now instead of one but no problem with that if I
use the LPT port
Like most computers now I only have one serial port.
.
It's a pity that W5XD did not show us ham spirit.
 
George, 5B4AGC
 
 
 
-------Original Message-------
 
From: Laurent HAAS - F6FVY
Date: 06/13/06 23:46:53
To: support at win-test.com
Subject: Re: [WT-support] Type ahead window
 
Hi again Werner
 
Werner Maier a écrit :
 
> Maybe the problem is at higher speeds than 12 WPM. Could You try 26-30
WPM?
 
I even tried it up to 40 WPM (*internal keyer* only), with no problem.
 
> Of Course that's possible - I don't blame win-test for it.
> But it seems to me that win-test just would not look for more
> letters after starting the cw output. (just an observation by
> me as a user). Of Course it could be a specific problem with
> the w5xd-box, but it is working fine, so why change :)
 
I'm sure we will heard experiences from other W5XD keyers users to
confirm it.
 
>> Note that W5XD *never* replied to our request on the
>> specifications of the data protocol he uses, to adapt it to WT.
>
> I've read that before. And it is a great pity :(
 
Yep. You can imagine the numerous hours Olivier spent on it !
 
73
 
Larry - F6FVY
 
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20060615/fa18c3e0/attachment.html


More information about the Support mailing list