AW: [WT-support]M/S

[DH5HV]

As Filipe allready mentioned:

The given serial number is NOT that relevant.
Important is the fact that BOTH station have the SAME serial in the log.

During log checking the managers just see if both stations have the same
received and given number.
If not it is a not complete QSO.



We see it in Writelog for example that some numbers are missing or others
are given twice.
And sometimes you see also the given number 101 at 12:00, given number 102
at 12:01, given number 103 at 12:02 and given number 101 at 12:04.
This happens when the multiplier station picks a call into the entry field
and does not work the station directly due to traffic/QRM.

It all looks horrible in the log, but what cares ???
No problem at all.

Jochen



-----Ursprüngliche Nachricht-----
Von: support-bounces at win-test.com [mailto:support-bounces at win-test.com] Im
Auftrag von Filipe Lopes
Gesendet: Freitag, 14. Juli 2006 13:20
An: support at win-test.com
Betreff: Re: [WT-support]M/S

Hi Larry,

thats it. Forgot to enable on one of the PC's!
Tnx!

tell me something: If station 1 is working for example CT1ILT and 
station2(mult) is working G0RRR both are giving out the same serial number 
right? Should the mult station wait for a serial number or is there a 
feature in WIN-TEST that gives to the mult station the following Serial 
number? we lost lot of points in IOTA contests and other contests when using

CT because of this. We sent the same serial for 2 stations! example CT1ILT 
received 4 and G0RRR received also 4!


73's Filipe


----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Friday, July 14, 2006 12:13 PM
Subject: Re: [WT-support]M/S


> Hi
>
> Filipe Lopes a écrit :
>
>> Imagine we have some sort of problem during the contest and one of the 
>> PC´s shuts down, this PC was of the STN1. Can we keep working with the 
>> other Station? because I tested this at home an when I turn on WIN-TEST 
>> it misses the qsos that were entered on the STN2 while STN1 was Off!
>> Is this right?
>
> Do you use v3 ? If so, did you enable the sync ? [Uncheck Options / 
> Disable sync]
>
> 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.0/388 - Release Date: 13-07-2006
>
> 

_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support