[WT-support] CW Keyer via USB

[Filipe Lopes]

Is there an easiest way of swapping frequency of both radios?
Do we have to go all the time to commands/swap freq?

Tnx
----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Wednesday, July 12, 2006 12:44 PM
Subject: Re: [WT-support] CW Keyer via USB


> Hi Filipe
>
> Filipe Lopes a écrit :
>
>> from now on I will use my Laptop for contesing (ACER 4001WLMi) the only 
>> problem is that it does not have any RS232 port! only 3 USB ports! I 
>> tryed rig control with USB-COM converter and it works OK, my only problem 
>> is CW, does the USB-COM converter work with my keyer(25pins to jack)?
>>
>> I havent tryed it yet because i donno how to set the converter to work as 
>> LPT!
>
> If your converter is fully compatible with RS 232, you just have to set on 
> which pin you want the CW to be output (DTR or RTS) in the serial port 
> setting in the WT Interface setup dlg. Unfortunately, not all USB / serial 
> converters are compatible.
>
> FYI, MicroHam USB converters are fully compatible with WT. We don't have 
> any connection with MicroHam, but we are using many of their products @ 
> FY5KE and are very satisfied.
>
> 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.10/385 - Release Date: 11-07-2006
>