[WT-support] Ez-master+WT Problem report

[HRS I4UFH]

Hi Don,

I don't think, the compiler save different version each compiling, I can
resend you the firmware sended to Oliver this morning.

At least please recheck if front panel buttons still work ...

Fabio I4UFH

----- Original Message -----
From: "Don Beattie" <g3ozf at btinternet.com>
To: <support at win-test.com>
Sent: Sunday, February 05, 2006 12:42 PM
Subject: Re: [WT-support] Ez-master+WT Problem report


> Olivier,
>
> I will send it. But I have reverted to V 1.35 of EZM, and the Scenarios
work
> OK. Fabio - is it possible something happened when you re-did the firmware
> for 1.36 ?
>
> 73
>
> Don, G3BJ
>
>
> ----- Original Message -----
> From: "Olivier F5MZN" <olecam at f5mzn.org>
> To: <support at win-test.com>
> Sent: Sunday, February 05, 2006 11:33 AM
> Subject: Re: [WT-support] Ez-master+WT Problem report
>
>
> > Hi again,
> >
> >> EZMaster V 1.36 were developed due notify of G3BJ that frontpanel
keypad
> >> didn't work properly in EXtended Mode.
> >>
> >> So I had fixed it and at this time V 1.36 is tha last stable version.
At
> >> this time I need to investigate if there were any side effect not
> >> reported
> >> before.
> >
> > Thanks to Fabio, I tested with firmware 1.36 and I didn't see anything
> > wrong with the scenarios.
> >
> > Marko and Don, could you please send me in private at <olecam at f5mzn.org>
> > your WT.INI file (located in the working directory of Win-Test) to check
> > if this couldn't be caused by a special configuration?
> >
> > 73,
> > --
> > Olivier / f5mzn
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>