[WT-support] DVK

[Tim Duffy K3LR]

Hi Chris!

We use the WinTest DVK at Multi Multi K3LR (11 stations).
All of our recordings are done live, while transmitting and on the "fly".
No problems. ESC works perfect as well.

Wish you the best at figuring out your #2 problem.
Best to you for the Holiday's
73,
Tim K3LR

http://www.k3lr.com

G3SJJ wrote:

> Not really convinced! Can you imagine, setting up for M/S, two stations,
> 6 operators, each wanting to record their own messages. 6x2x8=96
> recordings. Now, where did we put the dummy load? or don't forget to
> turn the power back up and switch the amp on! I guess it is OK on
> something like an FT1000MP where you can have a dummy load on antenna B,
> which is what I am doing now, but my K2 hasn't got that facility.
>
> I have rebooted my computer several times and still find the same
> problem. First time I press Fx I get message replay, after that I have
> to press Escape and then Fx.
>
> Chris G3SJJ
>
> Laurent HAAS - F6FVY wrote:
> > Hi all
> >
> > G3SJJ a écrit :
> >
> >> It might be useful Tonno, but it is not good practice to deliberately
> >> transmit over someone else when there is no need to! Unless of course
> >> you tune around the band to find a clear frequency, but that negates
> >> Larry's idea of saving time!
> >
> > I think (well, I'm sure...) you misunderstood what I meant.
> >
> > By "on the fly", I mean "while you're running".
> >
> > Instead of recording your CQ on a clear frequency (you have to find
> > one in all cases...) with PTT OFF, you can record it *and* you call CQ
> > at the same time. No wasted time.
> >
> > The same applies for "Tnx, G3SJJ" or "5914". If you don't like your
> > recorded message, record it again while you sent it to the other
> > station. You will have a new message *while* you're running ! No
> > wasted time...
> >
> > Ask José why it is important to not loosing time. No "bad operating
> > practice" here or such things you seem to "accuse" me ;-)  <= This is
> > a smiley
> >
> >> If an option is going to be made available then Shift Fx should be
> >> Record Without Tx, and Shift Fx plus Additional Key should be Record
> >> With Tx, to add an element of deterent!
> >
> > We also have to take account of the SO2R operating and its appropriate
> > shortcuts. Not easy...
> >
> >> I tried another keyboard but I still have to press Escape and then Fn
> >> to play a message. I have looked at the mHam Router settings but
> >> can't find anything that would disable Escape.
> >
> > From what I understand, the microham router is not involved in that.
> > So, you confirm it happens EVERY TIME ?! It was my initial (and
> > unanswered) question.
> >
> > 73
> >
> > Larry - F6FVY
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support