[WT-support] SO2R

[Filipe Lopes]

Here is the thing:

I just installed CT on the same PC that has WIN-TEST and it works fine with CT.

When calling on 20m CT focuses on 15m to write calls...
and vice versa.

I wonder if there is any configuration in WIN-TEST?

73's Filipe CT1ILT
  ----- Original Message ----- 
  From: Filipe Lopes 
  To: support at win-test.com 
  Sent: Wednesday, August 09, 2006 6:16 PM
  Subject: Re: [WT-support] SO2R


  I have tryed everything and I can find the problem!

  Anyone else experienced this kind of problem?

  73's Filipe CT1ILT
    ----- Original Message ----- 
    From: Filipe Lopes 
    To: support at win-test.com 
    Sent: Wednesday, August 09, 2006 6:01 PM
    Subject: Re: [WT-support] SO2R


    Hi José,

    Ok on the manual A, A+B, B radio switch.

    But I still dont understand why I dont get what you said when doing alternate CQ, what I get is, when CQING on RADIO 1 which is on 20m WIN-TEST should be focused on RADIO 2 which is on 15m and it is not doing that. When cqing on 20m, WIN-TEST is always focused on the band which is CQING.

    I am using V3.0.7 of Win-Test

    73's Filipe CT1ILT aka CT6A, 6Y3T
      ----- Original Message ----- 
      From: José Nunes CT1BOH 
      To: support at win-test.com 
      Sent: Wednesday, August 09, 2006 5:48 PM
      Subject: Re: [WT-support] SO2R


      Hi Filipe

      WX0B has a manual A, A+B, B radio switch.... You need a box that can talk to Win-test to comand the headphones audio from the computer and integrate that into the scenarios - Ezmaster can do it.
       
      When using Alternate CQ if Rado1 is TX then Win test is focused in radio2 (where you are listening and writing calls). It is working OK with my set-up: 2 FT1000MPs and Ezmaster

      73
      José Nunes
      CT1BOH
       
      On 8/9/06, Filipe Lopes <ct1ilt at mail.telepac.pt> wrote: 
        Hi ALL,

        I am testing some SO2R stuff now that my secund tower is up and I came up with the following:

        When using WX0B SO2R Box, ALTGr A, ALTGr T, ALTGr S, wont work. Is this normal with this SO2R Box?

        If I choose Alternate CQ as Scenario, ok that it calls CQ on each rig from time to time but the thing is when RADIO A is active should WIN-TEST change automatically to RADIO B's frequncy(band) 
        What I have for example is when RADIO A is cqing on 20m WIN-TEST shows me also 20m and it should show me RADIO B's instead which would be 15m RIGHT?


        73's Filipe Lopes CT1ILT

        _______________________________________________
        Support mailing list
        Support at win-test.com
        http://www.f5mzn.org/cgi-bin/mailman/listinfo/support







--------------------------------------------------------------------------


      _______________________________________________
      Support mailing list
      Support at win-test.com
      http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



--------------------------------------------------------------------------


      No virus found in this incoming message.
      Checked by AVG Free Edition.
      Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 09-08-2006



----------------------------------------------------------------------------


    _______________________________________________
    Support mailing list
    Support at win-test.com
    http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



----------------------------------------------------------------------------


    No virus found in this incoming message.
    Checked by AVG Free Edition.
    Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 09-08-2006



------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 09-08-2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20060810/c87fdbea/attachment.htm