[WT-support] TRX Control for FT990

Olivier F5MZN olecam at f5mzn.org
Sun Oct 9 10:28:49 CEST 2005


Franta wrote:
> Hi Wt-Forum,
> 
> I can't control my FT990 using WT. There are some symptoms that some commands 
> are running between the PC and TRX but it doesn't work at all. The problem 
> seems to be that the TRX will send the data but on the other side there is 
> nobody reading them.
> 
> I wrote a short Perl-Script to test my CAT-Interface and the TRX and all works 
> OK. I can send all commands to TRX and I can also read out all necessary data 
> according to operation manual.
> 
> I found in internet some notice about the difference beetween the Firmware of 
> FT990 Releases 1.2 (my TRX) and 1.3. I guess it will be the problem. Is it 
> possibel to extend WT to support also the Firmware Release 1.2 of the FT990? 
> I'm ready to test any command sequences, read and check data from the TRX 
> (with my script) and also test the changes in WT for this feature.

Hi -

Do you know other software that can work with your radio?

73,
-- 
Olivier / f5mzn


More information about the Support mailing list