[WT-support] Cluster spots ?

[Laurent HAAS - F6FVY]

Hi Andy

Andrew J. O'Brien a écrit :

> How does one go about setting up the cluster so that cluster spots show 
> up in the cluster monitor window (or in the bandmap) ?  I have wtDx 
> Telnet working and connected to the default cluster.  I have wtDx 
> Telnet  configured so
>  that it should communicate with WT ("disable communication with 
> Win-test" is unchecked) .  Spots do not show up in WT and sh/dx commands 
> do in WT do not produce anything in WT.

Most of the time, this issue relates to a bad broadcast IP address 
setting in Win-Test or/and in WtDxTelnet. Check also you enabled the 
Ethernet network in the Interfaces dialog of WT (even if you only have 
one machine).

If WT and WtDxTelnet are on the same machine (usual case for a 
single-op), use the 127.255.255.255 broadcast address in both applications.

If you set up a LAN for a multi-op effort, use a broadcast address which 
covers all machines involved in the LAN.

HTH.

73

Larry - F6FVY