[WT-support] WT 2.19.0-beta released

[HRS I4UFH]

Means :

" right but if now you digit 340 the radio goes to 28340, not really what i
really expected !!!!"


----- Original Message -----
From: "HRS I4UFH" <i4ufh at hamradiosolutions.com>
To: <support at win-test.com>
Sent: Wednesday, July 20, 2005 9:28 PM
Subject: Re: [WT-support] WT 2.19.0-beta released


> Hi Laurent and Oliver,
>
> Thank's for this new release,  related to the above features, I noticed
that
> there is some wrong when digit
> freq outside the range ( BTW on 160 the lower limit is 1715, is right, or
> there is some ini file for freq limit ?)
>
> if you select the priority to freq, digit 3740, the radio goes at 3740,
> right but if now you digit 340 the radio goes
> to 28430, not really what i really expected !!!!
>
> A feature or a bug ?? !!
>
> 73 de Fabio I4UFH
>
>
>
> > - Text commands : Feature request #43 : You can now enter the kHz only
> >    of the current band. To avoid conflict with band changes, you can set
> >    the priority to the band or the frequency.
> >
> >    Example : You're on 20 meters, and enter "15" (Enter).
> >
> >    - If the priority is set to the band, you will QSY to 15 meters. To
> >      move to 14015 you can use "015" or "15." (Enter).
> >    - If the priority is set to the freq, you will move to 14015. To QSY
> >      to 15 meters, you can use "15M" (Enter).
> >
> >    To set priority, use the Tools / Entering data / Priority menu.
> >    By default, the priority is set to the band. Tnx I4UFH.
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>