[WT-support] SO2R setup?

[Pete Smith]

At 05:48 AM 12/17/2004, Laurent HAAS - F6FVY wrote:

>Hi Greg and all
>
>Greg Fischer a écrit :
>
>(snip on your SO2R setup)
>
>>But in the commands window the SO2R option is greyed out and does
>>nothing when clicked. Use of the * key on the numberpad works fine switching
>>the radios.
>
>The SO2R menu and its associated commands only work for MultiKeyer users. 
>For now, WT does not remotely control the selection of headphone audio 
>source on the DX Doubler.


WT support for the DXD would be very simple to add.  All that is needed is 
to toggle Pin 14 of the LPT port high when Radio 1 is selected and low when 
radio 2 is selected.  The headphone audio switching is all done by hardware 
in the DXD, plus sensing lines from PTT of each radio so the DXD knows 
which radio is transmitting.

73, Pete N4ZR