[wt4hq] Win-Test 4.49.0-HQ released

[Dieter Kritzer]

Thank you very much, Larry!

OE0HQ will use this year again Win-Test with the Tunnel.

73! Dieter


Am 01.07.2023 um 12:28 schrieb Laurent HAAS - F6FVY:
> Hi
>
> Like every year, Win-Test 4.49.0-HQ is available here :
>
> http://download.win-test.com/v4/hq/wt-4.49.0-HQ.exe
>
> This special FREE version, reserved for the HQ teams, does not require 
> any registration.
>
> To prevent confusion with your current Win-Test setup, especially for 
> operators who bring their laptops to a remote QTH, the exe is named 
> wt-hq.exe, and the associated ini file is wt_hq.ini. You can copy the 
> content of your current wt.ini to wt_hq.ini to keep the same 
> configuration settings.
>
> This version is compatible with the official 4.49.0, so you can mix 
> them together on LAN and on WAN.
>
> You must use wtTunnel (client) version 1.18.0 available here :
>
> http://download.win-test.com/utils/wtTunnel-1.18.0.zip
>
> The tunnel server hasn't changed :
>
> http://www.win-test.com/hq05/tunnel/server/  (chose your flavor)
>
> Usual reminders :
>
> - One (and only one) wtTunnel (client) per LAN.
> - To enable sync on the WAN, one WT must be set as BridgeHead in each 
> LAN (Options / Interfaces / Network advanced settings). CAUTION : One 
> bridgehead per LAN. As this log is used to sync LAN and WAN, I suggest 
> to use a fast PC, and not assign it to a RUN position.
> - The wtDxTelnet frames (packet cluster) are not forwarded on the 
> tunnel. So, use one separate wtDxTelnet per LAN.
>
> Good luck !
>
> 73
>
> Larry - F6FVY
>