From f6fvy at free.fr  Sat Jul  1 12:28:36 2023
From: f6fvy at free.fr (Laurent HAAS - F6FVY)
Date: Sat, 1 Jul 2023 12:28:36 +0200
Subject: [wt4hq] Win-Test 4.49.0-HQ released
Message-ID: <78ecc535-66a8-4deb-4457-738fdc81e916@free.fr>

Hi

Like every year, Win-Test 4.49.0-HQ is available here :

http://download.win-test.com/v4/hq/wt-4.49.0-HQ.exe

This special FREE version, reserved for the HQ teams, does not require 
any registration.

To prevent confusion with your current Win-Test setup, especially for 
operators who bring their laptops to a remote QTH, the exe is named 
wt-hq.exe, and the associated ini file is wt_hq.ini. You can copy the 
content of your current wt.ini to wt_hq.ini to keep the same 
configuration settings.

This version is compatible with the official 4.49.0, so you can mix them 
together on LAN and on WAN.

You must use wtTunnel (client) version 1.18.0 available here :

http://download.win-test.com/utils/wtTunnel-1.18.0.zip

The tunnel server hasn't changed :

http://www.win-test.com/hq05/tunnel/server/  (chose your flavor)

Usual reminders :

- One (and only one) wtTunnel (client) per LAN.
- To enable sync on the WAN, one WT must be set as BridgeHead in each 
LAN (Options / Interfaces / Network advanced settings). CAUTION : One 
bridgehead per LAN. As this log is used to sync LAN and WAN, I suggest 
to use a fast PC, and not assign it to a RUN position.
- The wtDxTelnet frames (packet cluster) are not forwarded on the 
tunnel. So, use one separate wtDxTelnet per LAN.

Good luck !

73

Larry - F6FVY

-- 

Si vis pacem, para bellum - V?g?ce, Epitoma Rei Militaris

From oe8kdk at oevsv.at  Sat Jul  1 12:58:32 2023
From: oe8kdk at oevsv.at (Dieter Kritzer)
Date: Sat, 1 Jul 2023 12:58:32 +0200
Subject: [wt4hq] Win-Test 4.49.0-HQ released
In-Reply-To: <78ecc535-66a8-4deb-4457-738fdc81e916@free.fr>
References: <78ecc535-66a8-4deb-4457-738fdc81e916@free.fr>
Message-ID: <845fbd92-4aa0-db41-594b-47bda97ad782@oevsv.at>

Thank you very much, Larry!

OE0HQ will use this year again Win-Test with the Tunnel.

73! Dieter


Am 01.07.2023 um 12:28 schrieb Laurent HAAS - F6FVY:
> Hi
>
> Like every year, Win-Test 4.49.0-HQ is available here :
>
> http://download.win-test.com/v4/hq/wt-4.49.0-HQ.exe
>
> This special FREE version, reserved for the HQ teams, does not require 
> any registration.
>
> To prevent confusion with your current Win-Test setup, especially for 
> operators who bring their laptops to a remote QTH, the exe is named 
> wt-hq.exe, and the associated ini file is wt_hq.ini. You can copy the 
> content of your current wt.ini to wt_hq.ini to keep the same 
> configuration settings.
>
> This version is compatible with the official 4.49.0, so you can mix 
> them together on LAN and on WAN.
>
> You must use wtTunnel (client) version 1.18.0 available here :
>
> http://download.win-test.com/utils/wtTunnel-1.18.0.zip
>
> The tunnel server hasn't changed :
>
> http://www.win-test.com/hq05/tunnel/server/? (chose your flavor)
>
> Usual reminders :
>
> - One (and only one) wtTunnel (client) per LAN.
> - To enable sync on the WAN, one WT must be set as BridgeHead in each 
> LAN (Options / Interfaces / Network advanced settings). CAUTION : One 
> bridgehead per LAN. As this log is used to sync LAN and WAN, I suggest 
> to use a fast PC, and not assign it to a RUN position.
> - The wtDxTelnet frames (packet cluster) are not forwarded on the 
> tunnel. So, use one separate wtDxTelnet per LAN.
>
> Good luck !
>
> 73
>
> Larry - F6FVY
>