<div dir="ltr"><div dir="ltr">What rigs are you using?  Modern rigs support CW keying via DTR pin, so you don't need the WinKey, you can just connect a paddle directly to each radio, and let Win-Test do all the keying with no WinKey, via DTR.  If your rig doesn't support that, the keying circuits built into the <a href="https://bit.ly/S-BOX">S-BOX or S-BOX-USB</a> can key CW and PTT on 4 RCA connectors using two serial ports.<div><br></div><div>If you only want to use one WinKey try setting speed "Only by the Win-Test commands (Alt-V/F9/V10" instead of "Only by the Winkey Pot".  Win-Test only supports one keying speed for both radios, not separate keying speed per radio.  It doesn't support the connection of two WinKeys, just one.  <br><div><br clear="all"><div><div dir="ltr" data-smartmail="gmail_signature">On Thu, Jun 24, 2021 at 1:23 PM <<a href="mailto:ok3nr@seznam.cz" target="_blank">ok3nr@seznam.cz</a>> wrote:<br></div></div></div></div></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div>  I am trying to prepare Win-Test for upcoming VHF contest with two MicroHam devices: MKIII and u2R. I do have two following questions:<br></div></div></blockquote><div><br></div><div>Which WinKey are you trying to use, both?</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div></div><div>1) Is there a way to persuade Win-Test to honor CW speed settings in MicroHam device router ?</div></div></blockquote><div><br></div><div>Win-Test tells the WinKey what speed to use if you set the options correctly.</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div> I have problem with lower boundary. It is set to 20WPM, which is too much for VHF contest. When I set limits in device router, higher boundary can be set OK to some 83 WPM, but lower boundary stops at 20WPM. I am setting it to MicroHam potentiometer input only.</div></div></blockquote><div><br></div><div>Not a good idea.</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div> Any input below 20WPM and Win-Test is stuck at 20WPM.<br></div></div></blockquote><div><br></div><div>If you key by DTR instead of WinKey, Win-Test can go as low as 12 WPM.</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div></div><div>2) Is there a way to synchronize serial number in Win-Test with MicroHam Winkey SN ?<br></div></div></blockquote><div><br></div><div>If you use $SERIAL in a CW message, Win-Test will translate this to the proper serial number so you don't use the WinKey for that.</div><div><br></div><div>73,</div><div>Bob, N6TV</div><div><a href="https://bit.ly/S-BOX">https://bit.ly/S-BOX</a><br></div></div></div>