Did you disable spots logging?<div><br></div><div>From Release.txt:</div><div><br></div><div>4.8.0 (June 26, 2011)</div><div><br></div><div><div>- DX Spots window (Alt-A) : New option to enable/disable logging of</div><div>

  the incoming spots in the .dxc file. It is enabled by default. Under</div><div>  some circumstances (slow antivirus inspection, slow HDD, etc.),</div><div>  saving every spot (especially when using the RBN) was making Win-Test</div>

<div>  less responsive. The op-entered spots are always saved to allow their</div><div>  restoration on log startup. Tnx HA1AG @ ED9M.</div><div><br></div><div>- Packet window (Alt-O) : New option to enable/disable logging of</div>

<div>  the packet stream in the .pkt file. It is enabled by default. Under</div><div>  some circumstances (slow antivirus inspection, slow HDD, etc.),</div><div>  saving the packet data stream (especially when using the RBN) was</div>

<div>  making Win-Test less responsive. Tnx HA1AG @ ED9M.</div><div><br></div><div>For spots, Win-Test uses broadcast packets from the wtDxTelnet machine to all the logging computers.  Is wtDxTelnet runnnig on the remote machine or the in-shack machine?  Reading the description below, I don't completely understand how your network is set up, but I think it is best to use a <a href="http://en.wikipedia.org/wiki/Bridging_(networking)">WiFi "bridge"</a> between the remote DSL Router and the Local (in-shack) router.  The logging computers should only communicate with each other locally, no DSL traffic required.</div>

<div><br></div><div>But first disable packet logging; see if that is all you need to do.</div><div><br></div>73,<div>Bob, N6TV</div><br><div class="gmail_quote">On Mon, Dec 3, 2012 at 8:46 AM, Jose Ramon <span dir="ltr"><<a href="mailto:jr.hierro@gmail.com" target="_blank">jr.hierro@gmail.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi<br>In our multi-op setup we cannot divert to the network spots generated from a skimmer dxcluster. It gets very slow. This specially upsets the Runner station, tab from one field to another takes half of a second, etc...<br>


<br>Our internet connection comes from a DSL router some kilometers away to a WIFI router and then wired to an inhouse router. I haven't analyze the packets but my guess is that all spots are going forward and back again from the main router throughout the whole wired and wireless network. <br>


<br>Is there any other method to provide spots to the stations than broadcasting them?<br><br>73<br>Jose, EA7KW</blockquote></div></div>