Good find.  It does make more sense to change band first, then change mode.<div><br></div><div>As long as you only use Win-Test to change bands, or only use the radio's buttons to change bands, there should be no problem.</div>

<div><br></div><div>But if you try to use both methods, it does seem quite possible that you could end up on the wrong sideband the next time that you use the radio buttons.</div><div><br></div><div>I assume you were using the native support for K3 built-in to Win-Test, not OmniRig, but using OmniRig you may also have the same problem.</div>

<div><br></div><div>Personally I prefer to use the Radio's buttons to change bands, since typing in a band or frequency tends to disable RIT, and I like to keep RIT ON.</div><div><br></div><div>Be sure to use CONFIG:BAND MAP to make the band buttons skip over the non-contest bands.</div>

<div><br clear="all">73,<div>Bob, N6TV</div><br><div class="gmail_quote">On Tue, Oct 30, 2012 at 5:27 PM, Robert Chipperfield <span dir="ltr"><<a href="mailto:robert@syxis.co.uk" target="_blank">robert@syxis.co.uk</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
  

    
  
  <div bgcolor="#FFFFFF" text="#000000">
    Hi all,<br>
    <br>
    Something I spotted at ZD9UW (but couldn't work out exactly what was
    going on), then managed to reproduce at M4A over the weekend...<br>
    <br>
    When using the K3 with WT in SSB, if I QSY by typing "20" or "40"
    etc, WT appears to send the "change mode" command <i>before</i> the
    "change band". This means you can end up on the wrong sideband:<br>
    <ul>
      <li>Start on 20m USB.</li>
      <li>Type "40" in WT.</li>
      <li>WT sends LSB to the K3 - which is still on 20m at this point,
        and stores that mode with the band - then QSYs to 40m. So far,
        the operator is unaware of a problem (now on 40m LSB).</li>
      <li>Type "20" in WT.</li>
      <li>WT sends USB to the K3, thus setting the mode for 40m to USB,
        followed by the QSY to 20m... which is set to LSB from the
        previous QSY 20m -> 40m.</li>
      <li>At this point, both bands are set to the wrong sideband...</li>
    </ul>
    <p>If you then click on a spot on the same band, for example, the
      problem goes away, since it resets both the mode and frequency.<br>
    </p>
    <p>I've seen this with two different K3s, and two different
      installations of WT on different machines, so I don't think it's
      anything I'm doing!<br>
    </p>
    <p>(By way of a fix, I think it's just the set mode / set frequency
      commands that need to be sent the other way around, so it QSYs
      before setting the mode...)<br>
    </p>
    <p>73,<br>
      Rob, M0VFC<br>
    </p>
  </div>

<br>_______________________________________________<br>
Support mailing list<br>
<a href="mailto:support@win-test.com">support@win-test.com</a><br>
<a href="http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
<br></blockquote></div><br></div>