[WT-support] Problems with Miroham MKII WK and WT

[Bob Wilson, N6TV]

The full reinstall was probably unnecessary.

In microHAM Router version 8 they unfortunately removed 1st Dit Extension
and Keying Compensation from the WinKey tab. It is now called "R/T delay"
and it's on the PTT tab, which is unfortunate.

Here's what microHAM Support wrote to me after I asked them about it, over
3 years ago:

On Wed, May 9, 2018 at 9:31 AM microHAM Support <support at microham.com>
wrote:

> Both 1st extension and Keying compensation parameters has been replaced by
> integral parameter at PTT tab marked as R/T delay.
> Value of R/T delay is used in all modes, not just in Winkey generated CW.
>
> When Winkey is used as CW source, R/T delay is actually sent to WK chip as
> 1st extension in SemiBK PTT settings, or Keying Compensation for QSK PTT
> settings.
>
> 73 Jozef OM7ZZ


So if you had set R/T delay to 0, while using semi-break-in, the problem
would disappear.  Use PTT Lead to set TX DLY instead of R/T delay, which is
quite poorly documented.

73,
Bob, N6TV

On Fri, Nov 26, 2021 at 7:31 AM Ricardo Navarrete <ricardoea4zk at gmail.com>
wrote:

> I don't know what were the problem but now it is fixed, I restored the
> factory settings of MKII Router and delete all the .ini files
> uninstalled WT and deleted all config files, everything is set from zero
> and now it is running properly.
> SOrry for disturbing... it was my fault!
> Thnaks to everyone, thanks Laurent for your time!
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Libre
> de virus. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> <#m_2271188978905499565_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> El vie, 26 nov 2021 a las 13:23, Laurent HAAS - F6FVY (<f6fvy at free.fr>)
> escribió:
>
>> Hi Rick
>>
>> Le 26/11/2021 à 13:17, Ricardo Navarrete a écrit :
>>
>> > The same issue... some skimmers spot me as TA4M....
>> > No luck...
>>
>> If the MKII correctly displays "EA4M" on its LCD display when you're
>> spotted as TA4M, I'm afraid Win-Test has nothing to do with it :-(
>>
>> 73
>>
>> Larry
>>
>> --
>>
>> All of humanity's problems stem from man's inability
>> to sit quietly in a room alone.
>>
>> Blaise Pascal, Pensées
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
>
> --
> Ricardo Navarrete López
> ricardoea4zk at gmail.com
>
> Este envío es confidencial y está destinado únicamente a la persona a la
> que ha sido enviado. Puede contener información privada y confidencial. Si
> usted no es el destinatario al que ha sido remitida, no puede copiarla,
> distribuirla ni emprender con ella ningún tipo de acción. Si cree que lo ha
> recibido por error, por favor, notifíquelo al remitente.This transmission
> is confidential and intended solely for the person to whom it is addressed.
> It may contain privileged and confidential information. If you are not the
> intended recipient, you should not copy, distribute or take any action in
> reliance on it. If you believe that you have received this transmission in
> error, please notify the sender.
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20211126/9b940ef0/attachment.html>