From ea8csd.radio at gmail.com Mon Mar 1 14:54:58 2021 From: ea8csd.radio at gmail.com (Rafael Meneses Mendoza) Date: Mon, 1 Mar 2021 13:54:58 +0000 Subject: [WT-support] MicroKEYER III Message-ID: Good morning, I have the WT version 4.34.1 and a MicroKEYER III with version v2.11 (WinKEY rev. 31) and when loading a contest the WT detects me, the WinKey is v172 ??? The problem is that I cannot use the DVK from the WT, when pressing F1, F2 my indicates "message 100% not available. When I use it in CW I have no problem and it works correctly, any possible solution to get it to work 73`s Rafael EA8TK -------------- next part -------------- An HTML attachment was scrubbed... URL: From f6fvy at free.fr Mon Mar 1 15:04:52 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Mon, 1 Mar 2021 15:04:52 +0100 Subject: [WT-support] MicroKEYER III In-Reply-To: References: Message-ID: Hi Rafael Le 01/03/2021 ? 14:54, Rafael Meneses Mendoza a ?crit?: > The problem is that I cannot use the DVK from the WT, when pressing F1, > F2 my indicates "message 100% not available. I guess you want to use the MKIII internal DVK, right ? Check you enabled the integrated DVK in the MK/MKII/MKIII... properties dialog (in Options menu). And check you also set up a (virtual) COM port to the MKIII protocol in the interfaces dialog (in Options menu as well). 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From ea8csd.radio at gmail.com Mon Mar 1 16:21:16 2021 From: ea8csd.radio at gmail.com (Rafael Meneses Mendoza) Date: Mon, 1 Mar 2021 15:21:16 +0000 Subject: [WT-support] MicroKEYER III In-Reply-To: References: Message-ID: Hi Larry thanks for answering If I have I want to use the internal DVK of the MKIII If I have DVK enabled in the WT options If I have the WinKEY COM port configured in the WT https://drive.google.com/file/d/18WNa10UWcEUWV2QeGtEVNmb5YboN8JdG/view?usp=sharing https://drive.google.com/file/d/1uV_0YUDNceNo-wE35Yyh6RapeqLBIB4W/view?usp=sharing 73`s EA8TK El lun, 1 mar 2021 a las 14:05, Laurent HAAS - F6FVY () escribi?: > Hi Rafael > > Le 01/03/2021 ? 14:54, Rafael Meneses Mendoza a ?crit : > > > The problem is that I cannot use the DVK from the WT, when pressing F1, > > F2 my indicates "message 100% not available. > > I guess you want to use the MKIII internal DVK, right ? > > Check you enabled the integrated DVK in the MK/MKII/MKIII... properties > dialog (in Options menu). > > And check you also set up a (virtual) COM port to the MKIII protocol in > the interfaces dialog (in Options menu as well). > > 73 > > Larry - F6FVY > > -- > > All of humanity's problems stem from man's inability > to sit quietly in a room alone. > > Blaise Pascal, Pens?es > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ea8csd.radio at gmail.com Mon Mar 1 16:15:43 2021 From: ea8csd.radio at gmail.com (Rafael Meneses Mendoza) Date: Mon, 1 Mar 2021 15:15:43 +0000 Subject: [WT-support] MicroKEYER III In-Reply-To: References: Message-ID: Hi Larry thanks for answering If I have I want to use the internal DVK of the MKIII If I have DVK enabled in the WT options If I have the WinKEY COM port configured in the WT [image: 1.PNG] [image: 2.PNG] 73`s Rafael EA8TK El lun, 1 mar 2021 a las 14:05, Laurent HAAS - F6FVY () escribi?: > Hi Rafael > > Le 01/03/2021 ? 14:54, Rafael Meneses Mendoza a ?crit : > > > The problem is that I cannot use the DVK from the WT, when pressing F1, > > F2 my indicates "message 100% not available. > > I guess you want to use the MKIII internal DVK, right ? > > Check you enabled the integrated DVK in the MK/MKII/MKIII... properties > dialog (in Options menu). > > And check you also set up a (virtual) COM port to the MKIII protocol in > the interfaces dialog (in Options menu as well). > > 73 > > Larry - F6FVY > > -- > > All of humanity's problems stem from man's inability > to sit quietly in a room alone. > > Blaise Pascal, Pens?es > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1.PNG Type: image/png Size: 43108 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 2.PNG Type: image/png Size: 15729 bytes Desc: not available URL: From f6fvy at free.fr Mon Mar 1 16:32:34 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Mon, 1 Mar 2021 16:32:34 +0100 Subject: [WT-support] MicroKEYER III In-Reply-To: References: Message-ID: <69f9241f-3729-b421-301a-08a8ccb98856@free.fr> Hi Rafael Le 01/03/2021 ? 16:15, Rafael Meneses Mendoza a ?crit?: > If I have the WinKEY COM port configured in the WT I'm not talking about the WinKey port. I'm talking about the MK/MKII/MKIII control port in the interfaces. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es -------------- next part -------------- A non-text attachment was scrubbed... Name: wt_mk3.png Type: image/png Size: 46600 bytes Desc: not available URL: From ea8csd.radio at gmail.com Mon Mar 1 17:14:26 2021 From: ea8csd.radio at gmail.com (Rafael Meneses Mendoza) Date: Mon, 1 Mar 2021 16:14:26 +0000 Subject: [WT-support] MicroKEYER III In-Reply-To: <69f9241f-3729-b421-301a-08a8ccb98856@free.fr> References: <69f9241f-3729-b421-301a-08a8ccb98856@free.fr> Message-ID: Larry now if I have understood, I have already put it and it works perfectly. Thank you very much for the help 73`s Rafael EA8TK El lun, 1 mar 2021 a las 15:33, Laurent HAAS - F6FVY () escribi?: > Hi Rafael > > Le 01/03/2021 ? 16:15, Rafael Meneses Mendoza a ?crit : > > > If I have the WinKEY COM port configured in the WT > > I'm not talking about the WinKey port. > > I'm talking about the MK/MKII/MKIII control port in the interfaces. > > 73 > > Larry - F6FVY > > -- > > All of humanity's problems stem from man's inability > to sit quietly in a room alone. > > Blaise Pascal, Pens?es > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dl6rai at darc.de Tue Mar 2 09:04:05 2021 From: dl6rai at darc.de (Bernhard Buettner) Date: Tue, 02 Mar 2021 09:04:05 +0100 Subject: [WT-support] MicroKEYER III In-Reply-To: References: <69f9241f-3729-b421-301a-08a8ccb98856@free.fr> Message-ID: <415fec8f6366b5e221e88ad577356547@posteo.de> Detailed information about this feature has now been added to the WT documentation. Thanks all for your input. https://docs.win-test.com/wiki/DVK_CW_RTTY_Messaging#Using_the_microHAM_DVK 73 Ben, DL6RAI Am 01.03.2021 17:14 schrieb Rafael Meneses Mendoza: > Larry now if I have understood, I have already put it and it works perfectly. > > Thank you very much for the help > > 73`s Rafael EA8TK > > El lun, 1 mar 2021 a las 15:33, Laurent HAAS - F6FVY () escribi?: > >> Hi Rafael >> >> Le 01/03/2021 ? 16:15, Rafael Meneses Mendoza a ?crit : >> >>> If I have the WinKEY COM port configured in the WT >> >> I'm not talking about the WinKey port. >> >> I'm talking about the MK/MKII/MKIII control port in the interfaces. >> >> 73 >> >> Larry - F6FVY >> >> -- >> >> All of humanity's problems stem from man's inability >> to sit quietly in a room alone. >> >> Blaise Pascal, Pens?es >> _______________________________________________ >> Support mailing list >> support at win-test.com >> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support [1] > > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support [1] Links: ------ [1] http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support -------------- next part -------------- An HTML attachment was scrubbed... URL: From jjreisert at alum.mit.edu Wed Mar 3 16:08:56 2021 From: jjreisert at alum.mit.edu (Jim Reisert AD1C) Date: Wed, 03 Mar 2021 08:08:56 -0700 Subject: [WT-support] CTY-3105 Country Files - 03 March 2021 Message-ID: <20210303150937.17A4F208008@mx.glou.fr> The Country (CTY) Files were updated on 03 March 2021: https://www.country-files.com/cty-3105-03-march-2021/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-03-march-2021/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 3 March 2021 (CTY-3105) VER20210303, Version entity is Guinea-Bissau, J5 Added/changed Entities/Prefixes/Callsigns: * BG9XD/5 is China, BY * EA5IKT/P is Spain, EA * GB2CR is Scotland, GM * GB1004FTS and GB100FTS are both Wales, GW * K9GS is United States, K in CQ zone 5, ITU zone 8 * KG4NE is Guantanamo Bay, KG4 * KA1I is Guam, KH2 * K1ER, KK6GRC and N0RMC are all Hawaii, KH6 * N1TX is Alaska, KL * LU1AW/D, LU1DD/D, LU1VCL/D and LU4ETN/D are all Argentina, LU * LT5X/XP, LU1VYL/Y, LU1WUD/XA, LU1YJG/V, LU2WJV/XA, LU3DXG/V, LU3YLF/V, LU7VB/V, LU8VCC/V, LU8VCC/Y, LU9WZO/XA and LU9XQG/XP are all Argentina, LU in ITU zone 16 * R108M, R125PR, R1934G, R1961G, R21GDB, R90PAR, RA9UEZ/6, RG61PP, RN1M/P, UA0QNE/3 and UE23DZO are all European Russia, UA * VK4KC/8 is Australia, VK in CQ zone 29, ITU zone 55 Removed Entities/Prefixes/Callsigns: * 3D2AG/P in Rotuma Island, 3D2/r * 9M4CCB in East Malaysia, 9M6 * IQ0NV and IQ0NV/P in Sardinia, IS * WB9QAF in United States, K * KC3QVN in Alaska, KL * LU1EZ/H, LU1MAW/Y and LU6DO/V in Argentina, LU * RA21NY, RC21NY, RD21NY, RG21NY, RJ21NY, RK21NY, RO21NY, RT21NY, RU21NY, RW21NY, RY21NY, RZ5D/1, RZ9OL/3/P, UA3LMR/P and UB5O/1 in European Russia, UA * RV21NY in Kaliningrad, UA2 * R21HNY, RL21NY, RM21NY, RN21NY, RQ21NY, RU5D/8, RX21NY, RZ21NY, UB5O/0, UB5O/4 and UB5O/8 in Asiatic Russia, UA9 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us From jjreisert at alum.mit.edu Tue Mar 9 15:39:06 2021 From: jjreisert at alum.mit.edu (Jim Reisert AD1C) Date: Tue, 09 Mar 2021 07:39:06 -0700 Subject: [WT-support] CTY-3106 Country Files - 09 March 2021 Message-ID: <20210309143921.258F0208008@mx.glou.fr> The Country (CTY) Files were updated on 09 March 2021: https://www.country-files.com/cty-3106-09-march-2021/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-09-march-2021/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 9 March 2021 (CTY-3106) VER20210309, Version entity is Ireland, EI Added/changed Entities/Prefixes/Callsigns: * 9M7DX is East Malaysia, 9M6 * II0ICV is Sardinia, IS * AG1RL, K9JF, KB2S, KY0W and W4EF are all United States, K in CQ zone 3, ITU zone 6 * K6BFL, K7RB and K9MU are all United States, K in CQ zone 4, ITU zone 7 * KM4JAK, N4SS, W4NI, W4SSF and WT4R are all United States, K in CQ zone 4, ITU zone 8 * W7LG is United States, K in CQ zone 5, ITU zone 8 * K6IJ and KJ7UOI are both Hawaii, KH6 * KN4MGX and KW1W are both Alaska, KL * N2FVA is Puerto Rico, KP4 * LU1AAC/D, LU1IG/I, LU5EPB/D, LU7ARS/D, LU8AJM/D, LU9CHL/D and LW2ETF/D are all Argentina, LU * LU1VCS/Y, LU1YAE/Y, LU2AAS/Y, LU3YLF/Y, LU5YEC/Y, LU5YFB/Y, LU7VB/Y, LU7YAR/Y and LU7YTW/Y are all Argentina, LU in ITU zone 16 * R21BLIN, R9HV/6, RA9UUY/6 and RU9SO/6 are all European Russia, UA * R1PN/8 is Asiatic Russia, UA9 * RA/UR8IF and RV7B/9 are both Asiatic Russia, UA9 in ITU zone 20 * R3LA/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 23 * RV3DSA/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 34 * VI100AF and VK100AF are both Australia, VK in CQ zone 29, ITU zone 55 Removed Entities/Prefixes/Callsigns: * LU3HRS/Z in Antarctica, CE9 * AC4GW, AH2AV, K4CWW, K5GDX, K9GWS, K9WZB, KB7Q, KF4AV, KM4CH, KV4T, KX4X, N8GU, W7IY, W8HGH, W9CF, W9JEF, W9MAF and WB8BPU in United States, K * KB5OWT in Hawaii, KH6 * KN4ENR and KN4LVS in Alaska, KL * RT78ML and RW78ML in European Russia, UA * RG78ML in Asiatic Russia, UA9 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us From g3bj.don at gmail.com Fri Mar 12 10:29:38 2021 From: g3bj.don at gmail.com (Don Beattie) Date: Fri, 12 Mar 2021 09:29:38 +0000 Subject: [WT-support] SO2R switching using * Message-ID: Setting up WinTest today for the RSGB Commonwealth Contest has revealed a problem here. The * key no longer switches the focus. I see that WT reports "MicroHam device init error" but it all seems set up OK. If I switch to DXLog, it switches perfectly. Before I take everything apart here, are there any other things I might have forgotten? I'm using 4.34.1 here with a MicroHam u2R. WinKeying works fine - the function keys play and the * moves the screen logging window highlight. It just does not seem to be sending the command to the u2r. I had a W10 update today, but I doubt it is that, as the same installation with DXL is OK. Any ideas? 73, Don, G3BJ/G5W -------------- next part -------------- An HTML attachment was scrubbed... URL: From n6tv at arrl.net Fri Mar 12 10:34:32 2021 From: n6tv at arrl.net (Bob Wilson, N6TV) Date: Fri, 12 Mar 2021 01:34:32 -0800 Subject: [WT-support] SO2R switching using * In-Reply-To: References: Message-ID: Did you specify the microHam Control port on Win-Test Interface Configuration? Did you select Operating | Technique | Advanced SO2R? 73, Bob, N6TV On Fri, Mar 12, 2021, 1:30 AM Don Beattie wrote: > Setting up WinTest today for the RSGB Commonwealth Contest has revealed a > problem here. The * key no longer switches the focus. I see that WT reports > "MicroHam device init error" but it all seems set up OK. If I switch to > DXLog, it switches perfectly. > > Before I take everything apart here, are there any other things I might > have forgotten? I'm using 4.34.1 here with a MicroHam u2R. WinKeying > works fine - the function keys play and the * moves the screen logging > window highlight. It just does not seem to be sending the command to the > u2r. I had a W10 update today, but I doubt it is that, as the same > installation with DXL is OK. > > Any ideas? > > 73, Don, G3BJ/G5W > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: From n6tv at arrl.net Fri Mar 12 10:46:26 2021 From: n6tv at arrl.net (Bob Wilson, N6TV) Date: Fri, 12 Mar 2021 01:46:26 -0800 Subject: [WT-support] SO2R switching using * In-Reply-To: References: Message-ID: Another option is to not select the microHAM control port at all, and instead set up the SO2R tab in the Router for Classic Auto Control via virtual serial port pins instead of the microHam Control Protocol. Then you'll use two virtual serial ports in Win-Test to steer the TX focus and RX focus and Stereo mode, matching the ports specified in the SO2R tab, using virtual serial port DTR and RTS pins for these functions. This has always worked best for me when using the microHAM products and Win-Test. 73, Bob, N6TV On Fri, Mar 12, 2021, 1:34 AM Bob Wilson, N6TV wrote: > Did you specify the microHam Control port on Win-Test Interface > Configuration? > > Did you select Operating | Technique | Advanced SO2R? > > 73, > Bob, N6TV > > On Fri, Mar 12, 2021, 1:30 AM Don Beattie wrote: > >> Setting up WinTest today for the RSGB Commonwealth Contest has revealed a >> problem here. The * key no longer switches the focus. I see that WT reports >> "MicroHam device init error" but it all seems set up OK. If I switch to >> DXLog, it switches perfectly. >> >> Before I take everything apart here, are there any other things I might >> have forgotten? I'm using 4.34.1 here with a MicroHam u2R. WinKeying >> works fine - the function keys play and the * moves the screen logging >> window highlight. It just does not seem to be sending the command to the >> u2r. I had a W10 update today, but I doubt it is that, as the same >> installation with DXL is OK. >> >> Any ideas? >> >> 73, Don, G3BJ/G5W >> _______________________________________________ >> Support mailing list >> support at win-test.com >> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From g3bj.don at gmail.com Fri Mar 12 10:51:29 2021 From: g3bj.don at gmail.com (Don Beattie) Date: Fri, 12 Mar 2021 09:51:29 +0000 Subject: [WT-support] SO2R switching using * In-Reply-To: References: Message-ID: Bob - I've found the issue. I had noticed that there are two options in my drop-down in the config tab. One for MK2R/MK2R+/u2R the other for MK/MK2/MK3. I switched to the MK/MK2 etc and then back again and it started working! Weird . Sorry to trouble everyone. 73 Don On Fri, 12 Mar 2021 at 09:34, Bob Wilson, N6TV wrote: > Did you specify the microHam Control port on Win-Test Interface > Configuration? > > Did you select Operating | Technique | Advanced SO2R? > > 73, > Bob, N6TV > > On Fri, Mar 12, 2021, 1:30 AM Don Beattie wrote: > >> Setting up WinTest today for the RSGB Commonwealth Contest has revealed a >> problem here. The * key no longer switches the focus. I see that WT reports >> "MicroHam device init error" but it all seems set up OK. If I switch to >> DXLog, it switches perfectly. >> >> Before I take everything apart here, are there any other things I might >> have forgotten? I'm using 4.34.1 here with a MicroHam u2R. WinKeying >> works fine - the function keys play and the * moves the screen logging >> window highlight. It just does not seem to be sending the command to the >> u2r. I had a W10 update today, but I doubt it is that, as the same >> installation with DXL is OK. >> >> Any ideas? >> >> 73, Don, G3BJ/G5W >> _______________________________________________ >> Support mailing list >> support at win-test.com >> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support >> > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jjreisert at alum.mit.edu Tue Mar 23 23:14:13 2021 From: jjreisert at alum.mit.edu (Jim Reisert AD1C) Date: Tue, 23 Mar 2021 16:14:13 -0600 Subject: [WT-support] CTY-3107 Country Files - 23 March 2021 Message-ID: <20210323221429.86FC220800F@mx.glou.fr> The Country (CTY) Files were updated on 23 March 2021: https://www.country-files.com/cty-3107-23-march-2021/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-23-march-2021/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 23 March 2021 (CTY-3107) VER20210323, Version entity is St. Pierre & Miquelon, FP Added/changed Entities/Prefixes/Callsigns: * EA3HSD/P and EA6LU/P are both Spain, EA * TO1K is St. Martin, FS * AB7RT, KD4GVR and KO4LCM are all Hawaii, KH6 * KC0JVX is Alaska, KL * LU1QAC/H, LU4ETJ/D, LU6DK/D, LU7CC/E, LU7EMP/D, LU8DZH/D and LW1DUQ/D are all Argentina, LU * R105IA, R2014RK, R2014SE, R7AB/P, RM9T/P, RT9K/6 and UA3LMR/P are all European Russia, UA * R8MZ/9 is Asiatic Russia, UA9 in CQ zone 18 Removed Entities/Prefixes/Callsigns: * EA5EZ and EA5EZ/P in Balearic Islands, EA6 * GB2FEA and GB2KW in Scotland, GM * AH0IM in Guam, KH2 * KC4TJB and ND1A in Hawaii, KH6 * KF7ING, KF7WVE and NH2LS in Alaska, KL * N4MMT in Puerto Rico, KP4 * LU4ARU/D, LU7AA/D, LU7AA/U, LU7DUE/D, LU8EB/Y and LU8GCW/GP in Argentina, LU * R170SG, R1991A, R2021A, R30RCK, R900BL, R900DM, R900DV, RC30KR, RG30KR, RK30KR, RN2FA/1, RT30KR, RT9T/1, RU30KR and RZ30KR in European Russia, UA * R30ARCK, RA30KR, RD30KR, RJ30KR, RL30KR, RM30KR, RN0F, RN30KR, RO30KR, RQ30KR, RV30KR, RW30KR and UB5O/9 in Asiatic Russia, UA9 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us From ea8csd.radio at gmail.com Wed Mar 24 09:59:32 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Wed, 24 Mar 2021 08:59:32 +0000 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed Message-ID: An HTML attachment was scrubbed... URL: From ea8csd.radio at gmail.com Wed Mar 24 09:59:32 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Wed, 24 Mar 2021 08:59:32 +0000 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed Message-ID: An HTML attachment was scrubbed... URL: From f6fvy at free.fr Wed Mar 24 12:44:40 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Wed, 24 Mar 2021 12:44:40 +0100 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: References: Message-ID: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> Hi Rafael Le 24/03/2021 ? 09:59, Rafael Meneses a ?crit?: > looking at the bases of the next CQ WPX the Multi-Transmitter > Distributed category, any help to be able to connect two computers to > Wintest in different location? is there any tutorial? In the program I > see that it can be done in a local network but I don't know how it could > be done with the two PCs in another location There is no tutorial per se. 1/ You must run an instance of wtTunnelSrv (http://download.win-test.com/utils/wtTunnelSrv-2.4.2.zip) somewhere and open a port on the machine it's running on (and on the internet router for an external access). wtTunnelSrv is a command-line program. Usage : wtTunnelSrv (ex : wtTunnelSrv 1234 foo bar) 2/ In each LAN, you must run one instance of wtTunnel (http://download.win-test.com/utils/wtTunnel-1.17.0.zip). It's a Windows app, that must be placed in the same folder as Win-Test. Be sure to run ONLY ONE instance of wtTunnel in each LAN. You can access the parameters by right-clicking on the icon located in the applications tray (lower right of your desktop). 3/ To ensure log sync, one Win-Test in each LAN must be declared as Bridgehead (Options / Configure interfaces / Network protocol / Advanced settings). 4/ If you want to use DX cluster, one wtDxTelnet must be run in each LAN. The packet cluser frames are not distributed over the WAN. Hope this helps. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From ea8csd.radio at gmail.com Wed Mar 24 13:07:48 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Wed, 24 Mar 2021 12:07:48 +0000 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> References: , <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> Message-ID: <57A3DB06-61AF-405A-BE30-3BF3E61E4A2B@hxcore.ol> An HTML attachment was scrubbed... URL: From ea8csd.radio at gmail.com Wed Mar 24 18:34:50 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Wed, 24 Mar 2021 17:34:50 +0000 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> References: , <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> Message-ID: <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> An HTML attachment was scrubbed... URL: From ea8csd.radio at gmail.com Wed Mar 24 18:59:49 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Wed, 24 Mar 2021 17:59:49 +0000 Subject: [WT-support] Query wpx MULTI-DISTRIBUTED Message-ID: An HTML attachment was scrubbed... URL: From f6bee at free.fr Wed Mar 24 19:10:17 2021 From: f6bee at free.fr (f6bee at free.fr) Date: Wed, 24 Mar 2021 19:10:17 +0100 (CET) Subject: [WT-support] Query wpx MULTI-DISTRIBUTED In-Reply-To: Message-ID: <1091975491.221088553.1616609417328.JavaMail.root@zimbra58-e10.priv.proxad.net> Multi-Distributed is Multi-Multi or Multi-Unlimited with several station locations instead of one, that's all GL Jacques, F6BEE ----- Mail original ----- De: "Rafael Meneses" ?: support at win-test.com Envoy?: Mercredi 24 Mars 2021 18:59:49 Objet: [WT-support] Query wpx MULTI-DISTRIBUTED Hi, looking at the contest settings I don't see the Multi-Transmitter Distributed mode (MULTI-DISTRIBUTED) for the next WPX? I think I have the latest version of Wintest installed EA8CSD RAfael Enviado desde Correo para Windows 10 _______________________________________________ Support mailing list support at win-test.com http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support -------------- next part -------------- An HTML attachment was scrubbed... URL: From f6fvy at free.fr Wed Mar 24 21:22:38 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Wed, 24 Mar 2021 21:22:38 +0100 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> References: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> Message-ID: <66fd6525-20d3-d849-8329-16d7ba7251d2@free.fr> Hi Rafael Le 24/03/2021 ? 18:34, Rafael Meneses a ?crit?: > I have downloaded the files that you indicate, the first of all > wtTunnelSrv when I run it a windows command window opens and disappears, > I don't have time to do anything I'm using Windows 10 (I run it as > administrator and it also disappears) > > What can I do to continue with the process that you indicate? I repeat : wtTunnelSrv is a command-line program. Usage : wtTunnelSrv (ex : wtTunnelSrv 1234 foo bar) It means you must open a command line window in the appropriate directory and execute the program following the syntax above. > Hi, looking at the contest settings I don't see the Multi-Transmitter Distributed mode (MULTI-DISTRIBUTED) for the next WPX? I think I have the latest version of Wintest installed The Multi-Distributed category has been implemented in the build #801 of the dev / nigthly version that is available in the nightlies directory : http://download.win-test.com/v4/nightly/ As F6BEE suggested, you can also use the current version and select the Multi-Multi category setting and edit the Cabrillo file before sending your log. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From n6tv at arrl.net Wed Mar 24 21:33:26 2021 From: n6tv at arrl.net (Bob Wilson, N6TV) Date: Wed, 24 Mar 2021 13:33:26 -0700 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: <66fd6525-20d3-d849-8329-16d7ba7251d2@free.fr> References: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> <66fd6525-20d3-d849-8329-16d7ba7251d2@free.fr> Message-ID: Note that the wtTunnel client is getting flagged as a virus by way more AntiVirus programs than usual: https://www.virustotal.com/gui/file/71ad36bc8737591156236d61dacc9295ba62214e90d7b7f639a375e0447d2a43/detection so you're probably going to have to add an exception to your AntiVirus or Firewall software to make it work. The wtTunnelSrv software has no issues: https://www.virustotal.com/gui/file/7828f62ad68b6c0de8f31f349651d6ba8e9b356bc6d9f6f27759a84f568bab46/detection 73, Bob, N6TV On Wed, Mar 24, 2021 at 1:23 PM Laurent HAAS - F6FVY wrote: > Hi Rafael > > Le 24/03/2021 ? 18:34, Rafael Meneses a ?crit : > > > I have downloaded the files that you indicate, the first of all > > wtTunnelSrv when I run it a windows command window opens and disappears, > > I don't have time to do anything I'm using Windows 10 (I run it as > > administrator and it also disappears) > > > > What can I do to continue with the process that you indicate? > > I repeat : > > wtTunnelSrv is a command-line program. > > Usage : wtTunnelSrv (ex : wtTunnelSrv 1234 > foo bar) > > It means you must open a command line window in the appropriate > directory and execute the program following the syntax above. > > > Hi, looking at the contest settings I don't see the Multi-Transmitter > Distributed mode (MULTI-DISTRIBUTED) for the next WPX? I think I have the > latest version of Wintest installed > > The Multi-Distributed category has been implemented in the build #801 of > the dev / nigthly version that is available in the nightlies directory : > > http://download.win-test.com/v4/nightly/ > > As F6BEE suggested, you can also use the current version and select the > Multi-Multi category setting and edit the Cabrillo file before sending > your log. > > 73 > > Larry - F6FVY > > -- > > All of humanity's problems stem from man's inability > to sit quietly in a room alone. > > Blaise Pascal, Pens?es > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ea8csd.radio at gmail.com Thu Mar 25 08:39:17 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Thu, 25 Mar 2021 07:39:17 +0000 Subject: [WT-support] Query wpx MULTI-DISTRIBUTED In-Reply-To: <1091975491.221088553.1616609417328.JavaMail.root@zimbra58-e10.priv.proxad.net> References: <1091975491.221088553.1616609417328.JavaMail.root@zimbra58-e10.priv.proxad.net> Message-ID: <4B172C53-0C15-4806-A10A-A3CF25F34679@hxcore.ol> An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 87D4EA9D79A941809DBF7D4D82AF9937.png Type: image/png Size: 135 bytes Desc: not available URL: From ea8csd.radio at gmail.com Thu Mar 25 09:52:36 2021 From: ea8csd.radio at gmail.com (Rafael Meneses Mendoza) Date: Thu, 25 Mar 2021 08:52:36 +0000 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: References: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> <66fd6525-20d3-d849-8329-16d7ba7251d2@free.fr> Message-ID: Hi, The problem was my fault, it is my little experience that type of programs. I think that on the one hand I have it configured, this time I try on the other pc I attach an image of what I have done to see if I have an error in any parameter https://drive.google.com/file/d/1lTnPpdg4-WIZqmMOKKTnnfhWZL349A_x/view?usp=sharing https://drive.google.com/file/d/18rwYO9Tedr-mqiYygKqHmODTfSFhhzpe/view?usp=sharing https://drive.google.com/file/d/1dJ7MhOVuQI0-5yoQls95rNzlg5BkfgoR/view?usp=sharing 73`s EA8CSD Rafael Enviado desde Correo para Windows 10 *De: *Bob Wilson, N6TV *Enviado: *mi?rcoles, 24 de marzo de 2021 23:00 *Para: *Win-Test Reflector *Asunto: *Re: [WT-support] CQ WPX the Multi-Transmitter Distributed Note that the wtTunnel client is getting flagged as a virus by way more AntiVirus programs than usual: https://www.virustotal.com/gui/file/71ad36bc8737591156236d61dacc9295ba62214e90d7b7f639a375e0447d2a43/detection so you're probably going to have to add an exception to your AntiVirus or Firewall software to make it work. The wtTunnelSrv software has no issues: https://www.virustotal.com/gui/file/7828f62ad68b6c0de8f31f349651d6ba8e9b356bc6d9f6f27759a84f568bab46/detection 73, Bob, N6TV On Wed, Mar 24, 2021 at 1:23 PM Laurent HAAS - F6FVY wrote: Hi Rafael Le 24/03/2021 ? 18:34, Rafael Meneses a ?crit : > I have downloaded the files that you indicate, the first of all > wtTunnelSrv when I run it a windows command window opens and disappears, > I don't have time to do anything I'm using Windows 10 (I run it as > administrator and it also disappears) > > What can I do to continue with the process that you indicate? I repeat : wtTunnelSrv is a command-line program. Usage : wtTunnelSrv (ex : wtTunnelSrv 1234 foo bar) It means you must open a command line window in the appropriate directory and execute the program following the syntax above. > Hi, looking at the contest settings I don't see the Multi-Transmitter Distributed mode (MULTI-DISTRIBUTED) for the next WPX? I think I have the latest version of Wintest installed The Multi-Distributed category has been implemented in the build #801 of the dev / nigthly version that is available in the nightlies directory : http://download.win-test.com/v4/nightly/ As F6BEE suggested, you can also use the current version and select the Multi-Multi category setting and edit the Cabrillo file before sending your log. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es _______________________________________________ Support mailing list support at win-test.com http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support -------------- next part -------------- An HTML attachment was scrubbed... URL: From f6fvy at free.fr Thu Mar 25 12:31:01 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Thu, 25 Mar 2021 12:31:01 +0100 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: References: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> <66fd6525-20d3-d849-8329-16d7ba7251d2@free.fr> Message-ID: <427abd8f-2522-b162-db11-97b3c0ec83c4@free.fr> Hi Rafael Le 25/03/2021 ? 09:52, Rafael Meneses Mendoza a ?crit?: > I think that on the one hand I have it configured, this time I try on > the other pc I attach an image of what I have done to see if I have an > error in any parameter In wtTunnel, the "hostname or IP address" field must contain the (public) IP address or the (public) host name of the machine on which wtTunnelSrv is running. If you don't have a domain name attached to it, you will have to use the public IP address, but be aware that many Internet providers assign dynamic IPs (which means it can change over time). 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From ea8csd.radio at gmail.com Thu Mar 25 12:51:53 2021 From: ea8csd.radio at gmail.com (Rafael Meneses) Date: Thu, 25 Mar 2021 11:51:53 +0000 Subject: [WT-support] CQ WPX the Multi-Transmitter Distributed In-Reply-To: <427abd8f-2522-b162-db11-97b3c0ec83c4@free.fr> References: <0c9e34ad-a555-7da8-1a9a-64eb106812bd@free.fr> <19DA68EF-22FA-4BB4-8B9D-B108667ED1B2@hxcore.ol> <66fd6525-20d3-d849-8329-16d7ba7251d2@free.fr> , <427abd8f-2522-b162-db11-97b3c0ec83c4@free.fr> Message-ID: <52EC4888-5A33-475C-8E58-F9F43B3C1983@hxcore.ol> An HTML attachment was scrubbed... URL: