From jjreisert at alum.mit.edu Tue Jun 8 05:58:54 2021 From: jjreisert at alum.mit.edu (Jim Reisert AD1C) Date: Mon, 07 Jun 2021 21:58:54 -0600 Subject: [WT-support] CTY-3114 Country Files - 08 June 2021 Message-ID: <20210608035906.C0F2C20801D@mx.glou.fr> The Country (CTY) Files were updated on 08 June 2021: https://www.country-files.com/cty-3114-08-june-2021/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-08-june-2021/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 8 June 2021 (CTY-3114) VER20210608, Version entity is Curacao, PJ2 Added/changed Entities/Prefixes/Callsigns: * RI1ANR is Antarctica, CE9 in CQ zone 38, ITU zone 67 * TO11A is Guadeloupe, FG * TO9PL is St. Martin, FS * GB0VHF is Wales, GW * AH6LE and K0XP are both United States, K in CQ zone 3, ITU zone 6 * KP2X is United States, K in CQ zone 4, ITU zone 7 * KO4Z, NA4A, NA4W and WR4T are all United States, K in CQ zone 4, ITU zone 8 * N0YY and WR8AA are both United States, K in CQ zone 5, ITU zone 8 * KN4KYO is Hawaii, KH6 * KN4MTF is Alaska, KL * K4P and KP2Z are both Puerto Rico, KP4 * OH0J/1 is Finland, OH * R15MAKS, R21RUS, R8FF/7, R8XF/1, RA9ULL/6, RA9UUY/6, RL1I/P, RO21RU, RW21RU, UA3LMR/P and UB2FCS/6 are all European Russia, UA * RT21RU is European Russia, UA in ITU zone 30 * RA9DF/P is European Russia, UA in CQ zone 17, ITU zone 30 * RU21RU is Asiatic Russia, UA9 * R5QA/9 is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31 * UD6AOP/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 35 * R9YU/P is Asiatic Russia, UA9 in CQ zone 23, ITU zone 32 * R7AB/P is Ukraine, UR Removed Entities/Prefixes/Callsigns: * IQ1QQ/9 in Sicily, *IT9 * XR96IARU in Chile, CE * GB8NHS in Northern Ireland, GI * GM0WED/NHS and MM0DHQ/NHS in Scotland, GM * GB0GLV in Wales, GW * KI5DQL in Mariana Islands, KH0 * KD0JNO in Hawaii, KH6 * KC0EFL, KF7ARC, KK6SNS and KM6YOD in Alaska, KL * KP4PRE/EVNT in Puerto Rico, KP4 * LU1AM/D and LU8DZH/D in Argentina, LU * R1961AG, R1961GP, R60RDK, R7AB/P, RA2FDX/3, RM4R, RN60YG, RW0BG/3 and UA8CAD/3 in European Russia, UA * R18J, R3LA/0 and RZ5D/9 in Asiatic Russia, UA9 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us From radio.n4xu at gmail.com Tue Jun 8 13:32:58 2021 From: radio.n4xu at gmail.com (Bob Wilson) Date: Tue, 8 Jun 2021 07:32:58 -0400 Subject: [WT-support] CTY-3114 Country Files - 08 June 2021 In-Reply-To: <20210608035906.C0F2C20801D@mx.glou.fr> References: <20210608035906.C0F2C20801D@mx.glou.fr> Message-ID: Jim, Maybe it's too late for inclusion, but EG8RKB and EG9RKB are both mainland Spain CQ 14 / ITU 34. 73, Bob N4XU On Mon, Jun 7, 2021 at 11:59 PM Jim Reisert AD1C wrote: > The Country (CTY) Files were updated on 08 June 2021: > > https://www.country-files.com/cty-3114-08-june-2021/ > > For installation instructions, start at: > > https://www.country-files.com/ > > Hover your mouse over the word Contest in the menu, then select the > software you are using. > > To install the file, follow the link to your software at the top of the > page. > > If you are interested in a bigger CTY.DAT for everyday logging, you can get > it here: > > https://www.country-files.com/big-cty-08-june-2021/ > > Note that the release notes (and Version Entity) for this larger file are > different than what is shown below. There is a separate link to them. > > As a reminder, there is an RSS feed of the latest country file > announcements: > > https://www.country-files.com/feed/ > > Here are the release notes: > > 8 June 2021 (CTY-3114) > VER20210608, Version entity is Curacao, PJ2 > > Added/changed Entities/Prefixes/Callsigns: > > * RI1ANR is Antarctica, CE9 in CQ zone 38, ITU zone 67 > * TO11A is Guadeloupe, FG > * TO9PL is St. Martin, FS > * GB0VHF is Wales, GW > * AH6LE and K0XP are both United States, K in CQ zone 3, ITU zone 6 > * KP2X is United States, K in CQ zone 4, ITU zone 7 > * KO4Z, NA4A, NA4W and WR4T are all United States, K in CQ zone 4, > ITU zone 8 > * N0YY and WR8AA are both United States, K in CQ zone 5, ITU zone 8 > * KN4KYO is Hawaii, KH6 > * KN4MTF is Alaska, KL > * K4P and KP2Z are both Puerto Rico, KP4 > * OH0J/1 is Finland, OH > * R15MAKS, R21RUS, R8FF/7, R8XF/1, RA9ULL/6, RA9UUY/6, RL1I/P, > RO21RU, > RW21RU, UA3LMR/P and UB2FCS/6 are all European Russia, UA > * RT21RU is European Russia, UA in ITU zone 30 > * RA9DF/P is European Russia, UA in CQ zone 17, ITU zone 30 > * RU21RU is Asiatic Russia, UA9 > * R5QA/9 is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31 > * UD6AOP/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 35 > * R9YU/P is Asiatic Russia, UA9 in CQ zone 23, ITU zone 32 > * R7AB/P is Ukraine, UR > > Removed Entities/Prefixes/Callsigns: > > * IQ1QQ/9 in Sicily, *IT9 > * XR96IARU in Chile, CE > * GB8NHS in Northern Ireland, GI > * GM0WED/NHS and MM0DHQ/NHS in Scotland, GM > * GB0GLV in Wales, GW > * KI5DQL in Mariana Islands, KH0 > * KD0JNO in Hawaii, KH6 > * KC0EFL, KF7ARC, KK6SNS and KM6YOD in Alaska, KL > * KP4PRE/EVNT in Puerto Rico, KP4 > * LU1AM/D and LU8DZH/D in Argentina, LU > * R1961AG, R1961GP, R60RDK, R7AB/P, RA2FDX/3, RM4R, RN60YG, RW0BG/3 > and UA8CAD/3 in European Russia, UA > * R18J, R3LA/0 and RZ5D/9 in Asiatic Russia, UA9 > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, , https://www.ad1c.us > > > > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support > -------------- next part -------------- An HTML attachment was scrubbed... URL: From radio.n4xu at gmail.com Tue Jun 8 13:33:54 2021 From: radio.n4xu at gmail.com (Bob Wilson) Date: Tue, 8 Jun 2021 07:33:54 -0400 Subject: [WT-support] CTY-3114 Country Files - 08 June 2021 In-Reply-To: References: <20210608035906.C0F2C20801D@mx.glou.fr> Message-ID: DISREGARD - resending to Jim On Tue, Jun 8, 2021 at 7:32 AM Bob Wilson wrote: > Jim, > Maybe it's too late for inclusion, but EG8RKB and EG9RKB are both > mainland Spain CQ 14 / ITU 34. > > 73, Bob N4XU > > > On Mon, Jun 7, 2021 at 11:59 PM Jim Reisert AD1C > wrote: > >> The Country (CTY) Files were updated on 08 June 2021: >> >> https://www.country-files.com/cty-3114-08-june-2021/ >> >> For installation instructions, start at: >> >> https://www.country-files.com/ >> >> Hover your mouse over the word Contest in the menu, then select the >> software you are using. >> >> To install the file, follow the link to your software at the top of the >> page. >> >> If you are interested in a bigger CTY.DAT for everyday logging, you can >> get >> it here: >> >> https://www.country-files.com/big-cty-08-june-2021/ >> >> Note that the release notes (and Version Entity) for this larger file are >> different than what is shown below. There is a separate link to them. >> >> As a reminder, there is an RSS feed of the latest country file >> announcements: >> >> https://www.country-files.com/feed/ >> >> Here are the release notes: >> >> 8 June 2021 (CTY-3114) >> VER20210608, Version entity is Curacao, PJ2 >> >> Added/changed Entities/Prefixes/Callsigns: >> >> * RI1ANR is Antarctica, CE9 in CQ zone 38, ITU zone 67 >> * TO11A is Guadeloupe, FG >> * TO9PL is St. Martin, FS >> * GB0VHF is Wales, GW >> * AH6LE and K0XP are both United States, K in CQ zone 3, ITU zone >> 6 >> * KP2X is United States, K in CQ zone 4, ITU zone 7 >> * KO4Z, NA4A, NA4W and WR4T are all United States, K in CQ zone >> 4, ITU zone 8 >> * N0YY and WR8AA are both United States, K in CQ zone 5, ITU zone >> 8 >> * KN4KYO is Hawaii, KH6 >> * KN4MTF is Alaska, KL >> * K4P and KP2Z are both Puerto Rico, KP4 >> * OH0J/1 is Finland, OH >> * R15MAKS, R21RUS, R8FF/7, R8XF/1, RA9ULL/6, RA9UUY/6, RL1I/P, >> RO21RU, >> RW21RU, UA3LMR/P and UB2FCS/6 are all European Russia, UA >> * RT21RU is European Russia, UA in ITU zone 30 >> * RA9DF/P is European Russia, UA in CQ zone 17, ITU zone 30 >> * RU21RU is Asiatic Russia, UA9 >> * R5QA/9 is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31 >> * UD6AOP/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 35 >> * R9YU/P is Asiatic Russia, UA9 in CQ zone 23, ITU zone 32 >> * R7AB/P is Ukraine, UR >> >> Removed Entities/Prefixes/Callsigns: >> >> * IQ1QQ/9 in Sicily, *IT9 >> * XR96IARU in Chile, CE >> * GB8NHS in Northern Ireland, GI >> * GM0WED/NHS and MM0DHQ/NHS in Scotland, GM >> * GB0GLV in Wales, GW >> * KI5DQL in Mariana Islands, KH0 >> * KD0JNO in Hawaii, KH6 >> * KC0EFL, KF7ARC, KK6SNS and KM6YOD in Alaska, KL >> * KP4PRE/EVNT in Puerto Rico, KP4 >> * LU1AM/D and LU8DZH/D in Argentina, LU >> * R1961AG, R1961GP, R60RDK, R7AB/P, RA2FDX/3, RM4R, RN60YG, >> RW0BG/3 >> and UA8CAD/3 in European Russia, UA >> * R18J, R3LA/0 and RZ5D/9 in Asiatic Russia, UA9 >> >> 73 - Jim AD1C >> >> -- >> Jim Reisert AD1C, , https://www.ad1c.us >> >> >> >> _______________________________________________ >> Support mailing list >> support at win-test.com >> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From hiro.ueno at nifty.com Sat Jun 12 11:25:29 2021 From: hiro.ueno at nifty.com (Hiroyuki Ueno) Date: Sat, 12 Jun 2021 18:25:29 +0900 Subject: [WT-support] KCJ rule changed from 2021 Message-ID: <20210612182529.eef629a754729fa9d1fe1257@nifty.com> Hi KCJ contest rule seems to be changed. https://kcj-cw.com/e_index.htm Hiro JI1RXQ From f6fvy at free.fr Sat Jun 12 12:55:02 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Sat, 12 Jun 2021 12:55:02 +0200 Subject: [WT-support] KCJ rule changed from 2021 In-Reply-To: <20210612182529.eef629a754729fa9d1fe1257@nifty.com> References: <20210612182529.eef629a754729fa9d1fe1257@nifty.com> Message-ID: <67c8a594-fd85-7c4a-489c-37cc4e9b583e@free.fr> Hi Hiro Le 12/06/2021 ? 11:25, Hiroyuki Ueno a ?crit?: > KCJ contest rule seems to be changed. > https://kcj-cw.com/e_index.htm Thank you. I will implement the new rules in the coming days. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From jjreisert at alum.mit.edu Sat Jun 12 19:01:33 2021 From: jjreisert at alum.mit.edu (Jim Reisert AD1C) Date: Sat, 12 Jun 2021 11:01:33 -0600 Subject: [WT-support] CTY-3115 Country Files - 12 June 2021 Message-ID: <20210612170155.8C0A3208008@mx.glou.fr> The Country (CTY) Files were updated on 12 June 2021: https://www.country-files.com/cty-3115-12-june-2021/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-12-june-2021/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 12 June 2021 (CTY-3115) VER20210612, Version entity is Christmas Island, VK9X Added/changed Entities/Prefixes/Callsigns: * GB1CHM and GB2CHM are both Wales, GW * AA6OC, KC7I and KW6CR are all Hawaii, KH6 * KB2OPK is Puerto Rico, KP4 * OH0SCA/2 is Finland, OH * R7AB/P, UE16FA and UE2FA are all European Russia, UA * R21EURO is European Russia, UA in CQ zone 17, ITU zone 20 * RA6KE/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 34 Removed Entities/Prefixes/Callsigns: * KN4LVP in Guam, KH2 * R1994YU, R1996VK, R2014NC, R60CTC, R60MCC, R60YAG, RA60YG, RC60YG, RD60YG, RG21DS, RG60YG, RJ60YG, RK60YG, RN61YG, RO60YG, RT60YG, RU21DS, RU60YG and RW60YG in European Russia, UA * RV60YG in Kaliningrad, UA2 * RL60YG, RM60YG, RQ1A, RQ60YG, RX60YG, RY60YG and RZ60YG in Asiatic Russia, UA9 * R7AB/P in Ukraine, UR * VK2BYF/9 in Lord Howe Island, VK9L 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us From contest at oz0j.dk Tue Jun 15 22:03:22 2021 From: contest at oz0j.dk (OZ0J Joe) Date: Tue, 15 Jun 2021 22:03:22 +0200 Subject: [WT-support] IARU HF Championship 2021 - multiplier list of HQ stations Message-ID: <01e101d76221$7f9dcd90$7ed968b0$@oz0j.dk> Dear all Together with N6TV, Bob I will create a HQ multiplier list for the upcoming IARU HF Championship contest in July. Known updates so far: A9, Bharain is new member of IARU, Exchange code will be BARS that same as A2, Botswana (QRV in 2021?) EX, Kyrgyzstan is also new member of IARU. Exchange code will be ARUKR If any have call sign for the HQ station for these 2 DXCCs, please let me know. OE0HQ has changed the exchange code form OVSV to OV (thanks OE8KDK) NOTE that OV is not the normal code for Austria If anyone can help me with current (and active) call signs for AC, R1, R2 and R3 I will appreciate that. And I would very much like to have updated call information for: VE/VY, Canada (VE2FK is that you?) BY, China JA, Japan K, USA including IARU and ARRL I, Italy LZ, Bulgaria (one or two calls this year?) The list from last year (2020) can be found at https://www.dropbox.com/s/ugpsq15nkto9g3h/HQ2021.txt?dl=0 I have made a few known changes. PLEASE SEND ERRORS AND UPDATES TO contest at oz0j.dk N6TV will publish the link for download of this year multiplier list. My text file above will NOT work. Thank you. 73 Joe, OZ0J http://english.oz0j.dk -------------- next part -------------- An HTML attachment was scrubbed... URL: From noelhqnsu at globetrotter.net Thu Jun 17 23:48:57 2021 From: noelhqnsu at globetrotter.net (NOEL POULIN) Date: Thu, 17 Jun 2021 17:48:57 -0400 Subject: [WT-support] wintest and ARRL FIELD DAY Message-ID: Hello , I was playing with Wintest Last version, in ARRL Field Day scoring.... This year there is a new rule.....for points in field day... If you work a station that is in the same class it gives 2 points in cw... Of course that's a new rule just for this year according to ARRL... Example my station is in class D, If I work another station in class D it gives me 2 points... Wintest doesn't give 2 points ...it gives 0 point... Wonder if there is a way to correct this SO Wintest gives points ....instead of zero???? Thanks Noel From f6fvy at free.fr Fri Jun 18 08:53:48 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Fri, 18 Jun 2021 08:53:48 +0200 Subject: [WT-support] wintest and ARRL FIELD DAY In-Reply-To: References: Message-ID: <9fd76419-0372-4279-5278-f5807c5f251c@free.fr> Hi Noel Le 17/06/2021 ? 23:48, NOEL POULIN a ?crit?: > This year there is a new rule.....for points in field day... > > If you work a station that is in the same class it gives 2 points in cw... > > Of course that's a new rule just for this year according to ARRL... > > Example my station is in class D, If I work another station in class D > it gives me 2 points... > > Wintest doesn't give 2 points ...it gives 0 point... > > Wonder if there is a way to correct this SO Wintest gives points > ....instead of zero???? Actually, this rule was already in force in 2020. I just extended it to 2021 and built a dev version. Please use the nightly build #837 (or better). 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From noelhqnsu at globetrotter.net Fri Jun 18 12:46:16 2021 From: noelhqnsu at globetrotter.net (NOEL POULIN) Date: Fri, 18 Jun 2021 06:46:16 -0400 Subject: [WT-support] nightly builds Message-ID: Hi to all, I am looking for a nightly build of Wintest.... I never used nightly builds before, anybody can tell me where we can find them....I checked on the wintest page.., but found nothing what did I MISS???....Please help....\\Thanks Noel From sp5kp at wp.pl Fri Jun 18 13:37:53 2021 From: sp5kp at wp.pl (sp5kp_wp) Date: Fri, 18 Jun 2021 13:37:53 +0200 Subject: [WT-support] nightly builds In-Reply-To: References: Message-ID: http://download.win-test.com/v4/ -------------------------- Vy 73! Krzysztof "Chris" SP5KP, SN5N, 3Z50KP eMail: sp5kp at pzk.pl web: https://sp5kp.pzk.pl GSM: +48 603 310037 member of: SPDXC#430, SPCWC#49, PK RVG, EPC#6350, BSCC#245, BARTG#9046, RCWC#784, DMC#486 -----Original Message----- From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On Behalf Of NOEL POULIN Sent: Friday, June 18, 2021 12:46 PM To: support at win-test.com Subject: [WT-support] nightly builds Hi to all, I am looking for a nightly build of Wintest.... I never used nightly builds before, anybody can tell me where we can find them....I checked on the wintest page.., but found nothing what did I MISS???....Please help....\\Thanks Noel _______________________________________________ Support mailing list support at win-test.com http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support -- Ta wiadomo?? e-mail zosta?a sprawdzona pod k?tem wirus?w przez oprogramowanie AVG. http://www.avg.com From pa2a at xs4all.nl Fri Jun 18 17:31:54 2021 From: pa2a at xs4all.nl (pa2a at xs4all.nl) Date: Fri, 18 Jun 2021 17:31:54 +0200 (CEST) Subject: [WT-support] nightly builds In-Reply-To: References: Message-ID: <202377938.1495232.1624030314989@ox-webmail.xs4all.nl> No?l, http://download.win-test.com/v4/nightly/archives/?C=N;O=D 73s Steef PA2A > Op 18-06-2021 12:46 schreef NOEL POULIN : > > > Hi to all, > > I am looking for a nightly build of Wintest.... > > I never used nightly builds before, anybody can tell me where we can > find them....I checked on the wintest page.., > > but found nothing what did I MISS???....Please help....\\Thanks > > Noel > > _______________________________________________ > Support mailing list > support at win-test.com > http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support From ew2aa at tut.by Sat Jun 19 04:43:29 2021 From: ew2aa at tut.by (ew2aa at tut.by) Date: Sat, 19 Jun 2021 05:43:29 +0300 Subject: [WT-support] IARU HF Championship 2021 - multiplier list of HQ stations In-Reply-To: <01e101d76221$7f9dcd90$7ed968b0$@oz0j.dk> References: <01e101d76221$7f9dcd90$7ed968b0$@oz0j.dk> Message-ID: <608231624070596@mail.yandex.ru> An HTML attachment was scrubbed... URL: From jjreisert at alum.mit.edu Tue Jun 22 06:20:25 2021 From: jjreisert at alum.mit.edu (Jim Reisert AD1C) Date: Mon, 21 Jun 2021 22:20:25 -0600 Subject: [WT-support] CTY-3116 Country Files - 22 June 2021 Message-ID: <20210622042037.94EFE208041@mx.glou.fr> The Country (CTY) Files were updated on 22 June 2021: https://www.country-files.com/cty-3116-22-june-2021/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-22-june-2021/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 22 June 2021 (CTY-3116) VER20210622, Version entity is Bouvet, 3Y/b Added/changed Entities/Prefixes/Callsigns: * IQ1QQ/9 is Sicily, *IT9 * EA1RCI/KD is Spain, EA * EA5EZ is Balearic Islands, EA6 * GB0AMC is Wales, GW * W6NCB is United States, K in CQ zone 4, ITU zone 8 * N6EE is United States, K in CQ zone 5, ITU zone 8 * KB9SZM, KE7BAQ, KI5KBN and WB1BR are all Alaska, KL * N4MMT is Puerto Rico, KP4 * LU1AM/D is Argentina, LU * LU5YF/V is Argentina, LU in ITU zone 16 * RM0L/3, RT2F/3 and UA9APA/P are all European Russia, UA * R90KFF is European Russia, UA in ITU zone 19 * UB8S/P is European Russia, UA in ITU zone 30 * RA9DF/P is Asiatic Russia, UA9 * R9SAO/P and RV7B/9 are both Asiatic Russia, UA9 in ITU zone 20 * R1BIP/9 and UG4I/P are both Asiatic Russia, UA9 in CQ zone 16 * R5QA/P, RW0CE/9 and UE90AS are all Asiatic Russia, UA9 in CQ zone 18, ITU zone 31 * R0WA/P and UA0WG/P are both Asiatic Russia, UA9 in CQ zone 18, ITU zone 32 * UC7T/9 is Asiatic Russia, UA9 in CQ zone 19 Removed Entities/Prefixes/Callsigns: * GB0SI in Shetland Islands, *GM/s * B3CRA and B9CRA in China, BY * GB0GLS in Northern Ireland, GI * GB0SI in Scotland, GM * K6K in Hawaii, KH6 * LU1HYW/H in Argentina, LU * R108M, R1934G, R1961G, R21EURO, R35CHA, R35YCH, R75RAA, RA9DF/P, RG61PP, RV1CC/1 and UA9QCP/3 in European Russia, UA * RA/UT5IA, RM9T/P and UB8S/P in Asiatic Russia, UA9 * VK6SJ/4 in Australia, VK 73 - Jim AD1C -- Jim Reisert AD1C, , https://www.ad1c.us From ok3nr at seznam.cz Thu Jun 24 22:22:22 2021 From: ok3nr at seznam.cz (ok3nr at seznam.cz) Date: Thu, 24 Jun 2021 22:22:22 +0200 (CEST) Subject: [WT-support] MicroHam settings Message-ID: Hello, ? I am trying to prepare Win-Test for upcoming VHF contest with two MicroHam devices: MKIII and u2R. I do have two following questions: 1) Is there a way to persuade Win-Test to honor CW speed settings in MicroHam device router ? I have problem with lower boundary. It is set to 20 WPM, which is too much for VHF contest. When I set limits in device router, higher boundary can be set OK to some 83 WPM, but lower boundary stops at 20 WPM. I am setting it to MicroHam potentiometer input only. Any input below 20WPM and Win-Test is stuck at 20WPM. 2) Is there a way to synchronize serial number in Win-Test with MicroHam Winkey SN ? I tried to search about these settings, and found out something that 20WPM problem was already solved in version 2.something of Win-Test, but I still have trouble finding anything about matter. Thanks, Lukas OK3NR -------------- next part -------------- An HTML attachment was scrubbed... URL: From n6tv at arrl.net Thu Jun 24 23:02:40 2021 From: n6tv at arrl.net (Bob Wilson, N6TV) Date: Thu, 24 Jun 2021 14:02:40 -0700 Subject: [WT-support] MicroHam settings In-Reply-To: References: Message-ID: What rigs are you using? Modern rigs support CW keying via DTR pin, so you don't need the WinKey, you can just connect a paddle directly to each radio, and let Win-Test do all the keying with no WinKey, via DTR. If your rig doesn't support that, the keying circuits built into the S-BOX or S-BOX-USB can key CW and PTT on 4 RCA connectors using two serial ports. If you only want to use one WinKey try setting speed "Only by the Win-Test commands (Alt-V/F9/V10" instead of "Only by the Winkey Pot". Win-Test only supports one keying speed for both radios, not separate keying speed per radio. It doesn't support the connection of two WinKeys, just one. On Thu, Jun 24, 2021 at 1:23 PM wrote: > I am trying to prepare Win-Test for upcoming VHF contest with two > MicroHam devices: MKIII and u2R. I do have two following questions: > Which WinKey are you trying to use, both? > 1) Is there a way to persuade Win-Test to honor CW speed settings in > MicroHam device router ? > Win-Test tells the WinKey what speed to use if you set the options correctly. > I have problem with lower boundary. It is set to 20WPM, which is too much > for VHF contest. When I set limits in device router, higher boundary can be > set OK to some 83 WPM, but lower boundary stops at 20WPM. I am setting it > to MicroHam potentiometer input only. > Not a good idea. > Any input below 20WPM and Win-Test is stuck at 20WPM. > If you key by DTR instead of WinKey, Win-Test can go as low as 12 WPM. > 2) Is there a way to synchronize serial number in Win-Test with MicroHam > Winkey SN ? > If you use $SERIAL in a CW message, Win-Test will translate this to the proper serial number so you don't use the WinKey for that. 73, Bob, N6TV https://bit.ly/S-BOX -------------- next part -------------- An HTML attachment was scrubbed... URL: From n6tv at arrl.net Thu Jun 24 23:11:38 2021 From: n6tv at arrl.net (Bob Wilson, N6TV) Date: Thu, 24 Jun 2021 14:11:38 -0700 Subject: [WT-support] MicroHam settings In-Reply-To: References:

Message-ID: Also, consider using the DEFINEKEYStext command to map PageUp to Alt-F10 PageDn to Alt-F9 So you can change speeds more easily. 73, Bob, N6TV On Thu, Jun 24, 2021, 2:02 PM Bob Wilson, N6TV wrote: > What rigs are you using? Modern rigs support CW keying via DTR pin, so > you don't need the WinKey, you can just connect a paddle directly to each > radio, and let Win-Test do all the keying with no WinKey, via DTR. If your > rig doesn't support that, the keying circuits built into the S-BOX or > S-BOX-USB can key CW and PTT on 4 RCA connectors > using two serial ports. > > If you only want to use one WinKey try setting speed "Only by the Win-Test > commands (Alt-V/F9/V10" instead of "Only by the Winkey Pot". Win-Test only > supports one keying speed for both radios, not separate keying speed per > radio. It doesn't support the connection of two WinKeys, just one. > > On Thu, Jun 24, 2021 at 1:23 PM wrote: > >> I am trying to prepare Win-Test for upcoming VHF contest with two >> MicroHam devices: MKIII and u2R. I do have two following questions: >> > > Which WinKey are you trying to use, both? > > >> 1) Is there a way to persuade Win-Test to honor CW speed settings in >> MicroHam device router ? >> > > Win-Test tells the WinKey what speed to use if you set the options > correctly. > > >> I have problem with lower boundary. It is set to 20WPM, which is too much >> for VHF contest. When I set limits in device router, higher boundary can be >> set OK to some 83 WPM, but lower boundary stops at 20WPM. I am setting it >> to MicroHam potentiometer input only. >> > > Not a good idea. > > >> Any input below 20WPM and Win-Test is stuck at 20WPM. >> > > If you key by DTR instead of WinKey, Win-Test can go as low as 12 WPM. > > >> 2) Is there a way to synchronize serial number in Win-Test with MicroHam >> Winkey SN ? >> > > If you use $SERIAL in a CW message, Win-Test will translate this to the > proper serial number so you don't use the WinKey for that. > > 73, > Bob, N6TV > https://bit.ly/S-BOX > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ok3nr at seznam.cz Fri Jun 25 14:45:52 2021 From: ok3nr at seznam.cz (ok3nr at seznam.cz) Date: Fri, 25 Jun 2021 14:45:52 +0200 (CEST) Subject: [WT-support] MicroHam settings References:

Message-ID: I will simplify it to single interface example: One MKIII and one radio. Sure, I can use Win-Test software keyer and do not use MKIII Winkey, which works, and I can get lower than 20WPM. Just create keying interface by MKIII device router and use it by Win-Test. This way, CW speed potentiometer on MKIII is useless. I will key with different speed on connected paddles, set by MKIII, and with different speed from computer. I would like to actually use the speed potentiometer to set WPM for both Win -Test and MKIII, and do not use any other means for changing CW speed. This is somehow limited to 20WPM minimum. My question is: is it hardcoded into Win-Test executable, or is there any way to change this setting in ini or by other means ? I will always have only one WinKey per computer. The question was about doing two stations, each with different MicroHam device, but both set to have CW speed set by MicroHam device potentiometer only. About SN display - the contest is mixed mode, SSB mostly. I just would like to be able to transfer current SN to MicroHam WinKey and increment it with every QSO done, so it can be displayed on MicroHam device display. I do not know if it is possible, hence the question. ---------- P?vodn? e-mail ---------- Od: Bob Wilson, N6TV Komu: Win-Test Reflector Datum: 24. 6. 2021 23:08:01 P?edm?t: Re: [WT-support] MicroHam settings " What rigs are you using?? Modern rigs support?CW keying via DTR pin, so you don't need the WinKey, you can just connect a paddle directly to each radio, and let Win-Test do all the keying with no WinKey, via DTR.? If your rig doesn't support that, the keying circuits built into the S-BOX or S-BOX-USB (https://bit.ly/S-BOX) can key CW and PTT on 4 RCA connectors using two serial ports. If you only want to use one WinKey try setting speed "Only by the Win-Test commands (Alt-V/F9/V10" instead of "Only by the Winkey Pot".? Win-Test only supports one keying speed for both radios, not separate keying speed per radio.? It doesn't support the connection of two WinKeys, just one.?? On Thu, Jun 24, 2021 at 1:23 PM wrote: " ? I am trying to prepare Win-Test for upcoming VHF contest with two MicroHam devices: MKIII and u2R. I do have two following questions: " Which WinKey are you trying to use, both? ? " 1) Is there a way to persuade Win-Test to honor CW speed settings in MicroHam device router ? " Win-Test tells the WinKey what speed to use if you set the options correctly. ? " I have problem with lower boundary. It is set to 20WPM, which is too much for VHF contest. When I set limits in device router, higher boundary can be set OK to some 83 WPM, but lower boundary stops at 20WPM. I am setting it to MicroHam potentiometer input only. " Not a good idea. ? " Any input below 20WPM and Win-Test is stuck at 20WPM. " If you key by DTR instead of WinKey, Win-Test can go as low as 12 WPM. ? " 2) Is there a way to synchronize serial number in Win-Test with MicroHam Winkey SN ? " If you use $SERIAL in a CW message, Win-Test will translate this to the proper serial number so you don't use the WinKey for that. 73, Bob, N6TV https://bit.ly/S-BOX(https://bit.ly/S-BOX) _______________________________________________ Support mailing list support at win-test.com http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support " -------------- next part -------------- An HTML attachment was scrubbed... URL: From f6fvy at free.fr Fri Jun 25 15:19:40 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Fri, 25 Jun 2021 15:19:40 +0200 Subject: [WT-support] MicroHam settings In-Reply-To: References: Message-ID: Hi > I would like to actually use the speed potentiometer to set WPM for both Win > -Test and MKIII, and do not use any other means for changing CW speed. This > is somehow limited to 20WPM minimum. My question is: is it hardcoded into > Win-Test executable, or is there any way to change this setting in ini or by > other means ? It's hardcoded and can't be modified by any means. The only way to decrease speed below 20 wpm is to use Alt-F9, but I understand you wanted to use the WK pot. > About SN display - the contest is mixed mode, SSB mostly. I just would like > to be able to transfer current SN to MicroHam WinKey and increment it with > every QSO done, so it can be displayed on MicroHam device display. I do not > know if it is possible, hence the question. I have to check the MK manuals but I don't think a microHAM API exists for such a feature. In any case, it's currently not implemented. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From lists at subich.com Fri Jun 25 15:40:34 2021 From: lists at subich.com (Joe Subich, W4TV) Date: Fri, 25 Jun 2021 09:40:34 -0400 Subject: [WT-support] MicroHam settings In-Reply-To: References:

Message-ID: <79637eb1-a4dd-8498-6725-b67995eeb6c7@subich.com> > I have to check the MK manuals but I don't think a microHAM API exists > for such a feature. In any case, it's currently not implemented. There is no API for the microHAM serial number generator 73, ... Joe, W4TV On 2021-06-25 9:19 AM, Laurent HAAS - F6FVY wrote: > Hi > >> I would like to actually use the speed potentiometer to set WPM for >> both Win >> -Test and MKIII, and do not use any other means for changing CW speed. >> This is somehow limited to 20WPM minimum. My question is: is it >> hardcoded into Win-Test executable, or is there any way to change this >> setting in ini or by >> other means ? > > It's hardcoded and can't be modified by any means. > > The only way to decrease speed below 20 wpm is to use Alt-F9, but I > understand you wanted to use the WK pot. > > >> About SN display - the contest is mixed mode, SSB mostly. I just would >> like to be able to transfer current SN to MicroHam WinKey and >> increment it with every QSO done, so it can be displayed on MicroHam >> device display. I do not know if it is possible, hence the question. > > I have to check the MK manuals but I don't think a microHAM API exists > for such a feature. In any case, it's currently not implemented. > > 73 > > Larry - F6FVY > From noelhqnsu at globetrotter.net Fri Jun 25 16:15:03 2021 From: noelhqnsu at globetrotter.net (NOEL POULIN) Date: Fri, 25 Jun 2021 10:15:03 -0400 Subject: [WT-support] wintest dev and win 10 Message-ID: Hi all, One of my friend wants tu use WINTEST DEV (FOR ARRL FIELD DAY) he downloaded the dev, unzipped it in the wintest directory, as it is mentioned, all looks fine except when he double click on rhe WINDEV exe, it doesnt open at all. Wonder what could be wrong.....wintest.exe opens normaly.... Thanks Noel From f6fvy at free.fr Fri Jun 25 16:20:57 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Fri, 25 Jun 2021 16:20:57 +0200 Subject: [WT-support] wintest dev and win 10 In-Reply-To: References: Message-ID: <014b768e-f455-6557-a49b-b6e7575a5848@free.fr> Hi Noel Le 25/06/2021 ? 16:15, NOEL POULIN a ?crit?: > One of my friend wants tu use WINTEST DEV (FOR ARRL FIELD DAY) he > downloaded the dev, unzipped it in the wintest directory, as it is > mentioned, all looks fine except when he double click on rhe WINDEV exe, > it doesnt open at all. I guess you mean wt_dev.exe ? > Wonder what could be wrong.....wintest.exe opens normaly.... I guess you mean wt.exe ? Let me try on my side. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From ok3nr at seznam.cz Fri Jun 25 16:31:35 2021 From: ok3nr at seznam.cz (ok3nr at seznam.cz) Date: Fri, 25 Jun 2021 16:31:35 +0200 (CEST) Subject: [WT-support] MicroHam settings References:

Message-ID: Thank you very much for answer ! ---------- P?vodn? e-mail ---------- Od: Laurent HAAS - F6FVY Komu: support at win-test.com Datum: 25. 6. 2021 15:20:09 P?edm?t: Re: [WT-support] MicroHam settings "Hi > I would like to actually use the speed potentiometer to set WPM for both Win > -Test and MKIII, and do not use any other means for changing CW speed. This > is somehow limited to 20WPM minimum. My question is: is it hardcoded into > Win-Test executable, or is there any way to change this setting in ini or by > other means ? It's hardcoded and can't be modified by any means. The only way to decrease speed below 20 wpm is to use Alt-F9, but I understand you wanted to use the WK pot. > About SN display - the contest is mixed mode, SSB mostly. I just would like > to be able to transfer current SN to MicroHam WinKey and increment it with > every QSO done, so it can be displayed on MicroHam device display. I do not > know if it is possible, hence the question. I have to check the MK manuals but I don't think a microHAM API exists for such a feature. In any case, it's currently not implemented. 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es _______________________________________________ Support mailing list support at win-test.com http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support " -------------- next part -------------- An HTML attachment was scrubbed... URL: From f6fvy at free.fr Fri Jun 25 17:01:05 2021 From: f6fvy at free.fr (Laurent HAAS - F6FVY) Date: Fri, 25 Jun 2021 17:01:05 +0200 Subject: [WT-support] wintest dev and win 10 In-Reply-To: <014b768e-f455-6557-a49b-b6e7575a5848@free.fr> References: <014b768e-f455-6557-a49b-b6e7575a5848@free.fr> Message-ID: <2f144a8a-3ebf-f46e-f7c2-3d8c460c0d61@free.fr> Hi Noel Le 25/06/2021 ? 16:20, Laurent HAAS - F6FVY a ?crit?: > Let me try on my side. Indeed, there was something wrong with this (automated) build. A new build (#838) is now available (still named wt_dev.zip at the same location), and should be good with Win10 (and others as well). 73 Larry - F6FVY -- All of humanity's problems stem from man's inability to sit quietly in a room alone. Blaise Pascal, Pens?es From noelhqnsu at globetrotter.net Fri Jun 25 17:06:54 2021 From: noelhqnsu at globetrotter.net (NOEL POULIN) Date: Fri, 25 Jun 2021 11:06:54 -0400 Subject: [WT-support] wintest dev and win 10 Message-ID: <8e22ba34-fcf4-a9d1-7236-cc4855ff1e00@globetrotter.net> Thanks a million Larry... Will tell my friend.. Nice week-end to you Noel