[WT-support] K3NG Keyer

[Bob Wilson, N6TV]

In the WKSETUP menu in Win-Test, did you check the box "Enable Winkey V2
Additional Features"?

I would power everything off or use the "RESET" before connecting Win-Test,
and connect Win-Test first; I don't know what state Logger32 might have
left the K3NG keyer in.

73,
Bob, N6TV


On Tue, Jan 26, 2021 at 10:04 AM Franck <f4cib at free.fr> wrote:

> Hi Bob,
> Already commented out.
> Recognized as Winkey 2 with Logger32 and CW keying ok, but still init
> error.
>
> 73 de Franck, F4CIB
>
> ----- Mail original -----
> De: "Bob Wilson, N6TV" <n6tv at arrl.net>
> À: "Win-Test Reflector" <support at win-test.com>
> Envoyé: Lundi 25 Janvier 2021 22:12:15
> Objet: Re: [WT-support] K3NG Keyer
>
>
>
> You might need to comment out this line to make it work.
>
>
> #define OPTION_WINKEY_STRICT_HOST_OPEN
>
>
> Of course look in Windows Device Manager to make sure you are selecting
> the correct COM port. Just unplug the keyer to see which COM port
> disappears.
>
>
>
>
>
> 73,
> Bob, N6TV
>
>
>
> On Mon, Jan 25, 2021 at 11:57 AM Franck < f4cib at free.fr > wrote:
>
>
> Hi Bob,
> Yes Winkey and defaults settings do not work here 1200 8N2 handshake
>
> 73 de Franck, F4CIB
>
> ----- Mail original -----
> De: "Bob Wilson, N6TV" < n6tv at arrl.net >
> À: "Win-Test Reflector" < support at win-test.com >
> Envoyé: Lundi 25 Janvier 2021 19:51:47
> Objet: Re: [WT-support] K3NG Keyer
>
>
>
> Did you set COM10's Device name to WinKey in Win-Test Interface
> Configuration? Did you set the baud rate to 1200 baud? Just click the "Use
> WinKey Defaults" button to set 1200,8,N,2 Handshake, Handshake. and restart
> everything.
>
>
>
> 73,
> Bob, N6TV
>
>
>
> On Mon, Jan 25, 2021 at 10:31 AM Franck < f4cib at free.fr > wrote:
>
>
> Hi All,
> struggling with my K3NG keyer and Win-Test.
>
> I compile K3NG keyer with last up to date firmware (2021-01-24)
> Keyer options used:
> #define FEATURE_COMMAND_LINE_INTERFACE // Command Line Interface
> functionality
> #define FEATURE_WINKEY_EMULATION // disabling Automatic Software Reset is
> highly recommended (see documentation)
> #define OPTION_PRIMARY_SERIAL_PORT_DEFAULT_WINKEY_EMULATION // Use when
> activating both FEATURE_WINKEY_EMULATION and FEATURE_COMMAND_LINE_INTERFACE
> #define OPTION_INCLUDE_PTT_TAIL_FOR_MANUAL_SENDING
> #define OPTION_EXCLUDE_PTT_HANG_TIME_FOR_MANUAL_SENDING
> #define OPTION_WINKEY_STRICT_HOST_OPEN // require an admin host open
> Winkey command before doing any other commands
> #define OPTION_WINKEY_2_SUPPORT // comment out to revert to Winkey version
> 1 emulation
> #define OPTION_WINKEY_INTERRUPTS_MEMORY_REPEAT
> #define OPTION_WINKEY_2_HOST_CLOSE_NO_SERIAL_PORT_RESET // (Required for
> Win-Test to function)
> #define OPTION_WINKEY_IGNORE_LOWERCASE // Enable for typical K1EL Winkeyer
> behavior (use for SkookumLogger version 1.10.14 and prior to workaround "r"
> bug)
> #define OPTION_PROG_MEM_TRIM_TRAILING_SPACES // trim trailing spaces from
> memory when programming in command mode
> #define OPTION_DIT_PADDLE_NO_SEND_ON_MEM_RPT // this makes dit paddle
> memory interruption a little smoother
> #define OPTION_CW_KEYBOARD_CAPSLOCK_BEEP
> #define OPTION_DO_NOT_SEND_UNKNOWN_CHAR_QUESTION
> #define OPTION_EXCLUDE_EXTENDED_CLI_COMMANDS
> #define OPTION_DISPLAY_MEMORY_CONTENTS_COMMAND_MODE
>
> On Win-Test side, Keyer connected to COM10 set to Winkey 8N2 DTR set
> always to 1, RTS always to 0 (tried as well default which are handshake for
> both)
> Options, Winkey configuration unchanged (i tried also winkey v2 features
> enabled):
> All unticked but paddle watchdog, Iambic A, PTT, 752Hz, tail&lead 50ms,
> fixed tail, synchronized by WT only
>
> And i got Winkey Device init Error on the status area
>
> Can anyone share with me his settings ?
>
> 73 de Franck, F4CIB
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20210126/6c67a092/attachment-0001.html>