[WT-support] Kenwood + Perseus + skimmer ?

[Patrick EGLOFF]

HI Bob,

You're probably right !
I will test it and modify my configuration if necessary.
I must say that I've made a lot of tests before getting everything
operational ... There are probably unnecessary things.   :-)

73 Patrick TK5EP


Le mer. 8 déc. 2021 à 07:52, Bob Wilson, N6TV <n6tv at arrl.net> a écrit :

> Good job Patrick.  But I'm not sure why you have to run the Perseus
> software and com0com.  CW Skimmer should track Win-Test band changes OK
> without those programs, right?
>
> 73,
> Bob, N6TV
>
> On Tue, Dec 7, 2021, 10:38 PM Patrick EGLOFF <pegloff at gmail.com> wrote:
>
>> FYI,
>>
>> I wrote a small article on my home page about my results and
>> configuration.
>> Any feedback is welcome.
>>
>>
>> https://www.egloff.eu/index.php/en/8-francais/la-technique/255-wintest-skimmer
>>
>> 73, Patrick  TK5EP
>>
>> Le mar. 30 nov. 2021 à 19:19, Bob Wilson, N6TV <n6tv at arrl.net> a écrit :
>>
>>> In wtDxTelnet, Options | DX Cluster Properties, check the "CW Skimmer"
>>> box at the bottom for your CW Skimmer connection.  Do not check it for your
>>> DX Cluster connection.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>>
>>> On Tue, Nov 30, 2021 at 1:04 PM Patrick EGLOFF <pegloff at gmail.com>
>>> wrote:
>>>
>>>>   I'm a bit confused on how to use the following setup :
>>>>     - Win-Test
>>>>     - TS850 via Microham serial converter
>>>>     - Perseus SDR
>>>>     - CW Skimmer
>>>>     Skimmer talks to Perseus.
>>>>     I could make the wtDXTelnet sessions work correctly, I do receive
>>>> spots
>>>>     from both sources.
>>>>     But I'm searching how to keep the Perseus in track with the
>>>> operating
>>>>     frequency.
>>>>     Do I have to use a third party software like OmniRig, or a serial
>>>> port
>>>>     sharing ?
>>>>     For the moment, I do get errors : "Command ignored: "SKIMMER/QSY
>>>> 7010.0"
>>>>
>>>>     Thanks for any help,
>>>>     73 Patrick TK5EP.
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>> --
Patrick Egloff
email : pegloff at gmail.com
Web page : http://www.egloff.eu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20211208/73203a27/attachment.html>