[WT-support] FT5K multimodes fonction keys setup

[Bob Wilson, N6TV]

Use https://www.kkn.net/~n6tv/wtscripts/YaesuScripts.zip for voice memory
playback (PB command scripts).

DTR CW keying is not supported by the SCU-17.  It doesn't connect to the
FTdx5000 KEY jack.

I can provide an S-BOX-USB to FTdx5000 owners that need DTR CW and rig
control via one USB cable.  Works great.  SCU-17 is designed for DATA modes.

73,
Bob, N6TV
https://bit ly/S-BOX

On Sun, Dec 5, 2021, 2:57 PM <f6ira at sfr.fr> wrote:

> ‌setup wintest + windows 10 -> FT5K + SCU17
> Try to setup com ports to play audio messages and CW memories into
> multimode contest. (ARRL 10M next weekend)
> virtual com port for FT5K = com7
> virtuals com ports SCU-17 = 4 and 5
> when set correct DTR and RTS into com7 to play CW messages (it work) but
> lost audio playback when switch SSB
> when back to handshake position into COM7 DTR RTS audio playback work
> again by SCU-17 with some COM4 and 5 settings but... lost CW messages (of
> course)
> win-test able to work cat commands as  {CAT1ASC PB0#;} to play memories
> with *Shift-F#*
> what i'm wrong ?
> Any experiencies are welcome
> Thanks
> Gilles Desansac F6IRA
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20211205/17b9d85b/attachment.html>