[WT-support] Ic 7610 & MMTTY

[Bob Wilson, N6TV]

 Use the second Icom virtual serial port with MMTTY, not the first virtual
Icom serial port that is used by Win-Test for rig control.  MMTTY and
Win-Test can use the same USB cable for both rig control and FSK keying,
but they cannot use the same virtual serial port.

See page 80 of IC-7610 manual.  Set:

USB Keying (RTTY) to USB1 (B) DTR
USB Send to USB1 (B) RTS

Install EXTFSK.  In the MMTTY Setup menu, set the COM port to EXTFSK and
close the setup window. This will open a new window where you must select
the second virtual COM of the IC-7610.  Select FSK via DTR, PTT via RTS.

Finally, in the Misc tab, set the Tx Port to COM+TxD FSK and select option
C, Limiting Speed, as shown here:

http://docs.win-test.com/wiki/RTTY

FYI, you can also set USB Keying (CW) to USB1 (A) DTR, then Win-Test can
key CW through the rig control serial port too.

73,
Bob, N6TV

On Fri, Mar 30, 2018 at 4:45 AM, Juan Del Olmo, EA5FID <ea5fid at lynxdxg.com>
wrote:

> Hi Bob !!
>
>
>
> Now, it works perfectly, but I cannot configure with the MMTTY.
>
>
>
> Could you help me?
>
>
>
> Tks in advance & 73
>
>
>
> *EA5FID*
>
> Juan Del Olmo
>
> ea5fid at lynxdxg.com
>
> http://lynxdxg.com/
>
> *EA1DX ArCluster* 185.73.168.155:23
>
>
>
>
>
> *De:* support-bounces at win-test.com [mailto:support-bounces at win-test.com] *En
> nombre de *Bob Wilson, N6TV
> *Enviado el:* lunes, 26 de febrero de 2018 18:24
> *Para:* Win-Test Reflector
> *Asunto:* Re: [WT-support] Ic 7610
>
>
>
> On Mon, Feb 26, 2018 at 8:48 AM, Juan de las Cuevas González <
> jfdelascuevas at gmail.com> wrote:
>
> I need connect tx New IC 7610.
>
> Is posible with last version?
>
>
>
> Yes, version wt-4.28.0-dev is working fine now, with the rig set to the
> default CI-V address (98h).
>
>
>
> Download wt_dev.zip from http://download.win-test.com/v4/nightly/
> (Win-Test password required).  Extract to C:\Program Files (x86)\Win-Test\
> (Administrator privileges required).
>
>
>
> Run wt_dev.exe instead of wt.exe, select IC-7610 as the radio type in
> Win-Test Interface Configuration, and it should work fine.
>
>
>
> I will be updating my Win-Test scripts to include support for the scope of
> this radio very soon, and will post a note on this reflector when they are
> available.
>
>
>
> 73,
>
> Bob, N6TV
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Libre
> de virus. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> <#m_5860150155086418226_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20180330/bf4a2528/attachment.html>