[WT-support] RE : Re: RE : Re: RE : Re: Problem... WT with FT757GXII !!!

[GG PGT]

Hi OM,
Problem solved !!!
On FT757GXII, do not forget to check "do not poll" !!!
The TRX will work much better !!!
Thank you Bob !!!
GG, F5NVF

-------- Message d'origine --------
De : "Bob Wilson, N6TV" <n6tv at arrl.net> 
Date : 27/11/2017  15:32  (GMT+01:00) 
À : GG PGT <ggpgt at free.fr>, Win-Test Reflector <support at win-test.com> 
Objet : Re: RE : Re: RE : Re: [WT-support] Problem... WT with FT757GXII !!! 

Please send me screen shots of your Win-Test Interface Configuration, RigExpert configuration, DigitMaster configuration.
Most likely cause, based on the symptoms you describe, is that the CAT port RTS/DTR is set to "Handshake" instead of to Always OFF (in Win-Test), and some other device like the DigiMaster is configured for RTS = PTT.
73,Bob, N6TV

On Mon, Nov 27, 2017 at 8:18 AM, GG PGT <ggpgt at free.fr> wrote:
Hi Bob,
The configuration is OK :COM7 CATCOM8 (Other interface) DTR CW, RTS PTT
Leds on Rig Expert are OK, CW messages go on the air... No problem for this, so I think WT is OK !
I have verified the cable between interface and TRX : OK !!!
On FT757GXII, I have to press key VOX to transmit on the air (in CW mode). VOX key out : No transmit on air !!!As soon as the VOX key is pressed (without send message), TRX transmit a few milliseconds every second...When I unplug CAT connector on TRX, the problem stop...
I have no idea...
GG, F5NVF

-------- Message d'origine --------
De : "Bob Wilson, N6TV" <n6tv at arrl.net> 
Date : 26/11/2017  18:00  (GMT+01:00) 
À : ggpgt at free.fr, Win-Test Reflector <support at win-test.com> 
Objet : Re: RE : Re: [WT-support] Problem... WT with FT757GXII !!! 

Only define one CW port (COM8), not two (COM10?)
Use COM8 DTR for CW, COM8 RTS for PTT.
Watch LEDs on RigMaster.
Blue arrows?  In Win-Test band map?  They are for scrolling only, not band changes.
Use Alt-F1/F2 to change bands, or just type a freq in logging window, 14025 [Enter].

73,
Bob, N6TV

On Nov 26, 2017 11:18 AM, "GG PGT" <ggpgt at free.fr> wrote:
Hi,
Sorry for previous message, error from mail program....
New configuration with FT757GXII :
WT on PC 64 bits > (USB) Rig Expert TI8 (mini DIN) > 
FT757GXII
 
COM 7 CAT radio 1 (FT757GXII) > 4800 8-N-2, parameters by default for 
FT757GXIICOM 8 Other interface, PTT/CW (DTR, RTS)COM 10 Other interface, (for CW)
 
Band do not change with blues arrows...
CW messages (F1, F2...) go into TRX, TRX goes on air fine...
But when the TRX is in reception, it transmits a few milliseconds every second... It looks like there is an endless loop, like TRX wait something...
Any idea ???
GG, F5NVF



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20171128/c412a7a9/attachment.html>