[WT-support] Problem... WT with FT757GXII !!!

[Bob Wilson, N6TV]

GG,

(What is your callsign please?).

I assume you are using this CAT interface with your FT757GX2:

http://www.g4zlp.co.uk/unified/YaesuCAT.shtml


This CAT interface does not support CW.  This radio does not support CAT
commands to generate CW either.

So, you would also need something like this:

http://www.g4zlp.co.uk/unified/DigiMaster_CW.htm


Which can be used with Win-Test either as a WinKeyer or as an RTS/DTR pin
keyer (but I have never used it).

You can download wtCom.dll from:

http://download.win-test.com/utils/wtCom-2.0.5.zip

Unzip to C:\Program Files (x86)\Win-Test\ (must run Unzip as Administrator).

73,
Bob, N6TV

On Tue, Nov 21, 2017 at 8:09 AM, GG <ggpgt at free.fr> wrote:

> Hi OM,
>
> WT on PC 64 bits > (USB) Interface CAT ZLP Electronics (mini DIN) >
> FT757GXII
>
> Interface is OK on PC (COM 7) !!!
>
> Config is OK in WT (Config interface)
> COM 7 > radio 1 (FT757GXII) > 4800 8-N-2, parameters by default for
> FT757GXII
>
> I can choose Band up and down with arrows, I deduce that the CAT commands
> are received by TRX...
>
> When I consult the doc, I read that we can emit in CW using the keys F1,
> F2 ...
>
> It does not work ... Would I have wrongly configured WT ??? Would I have
> forgotten a connection ???
>
> On the other hand, when I try to install wtDxTelnet 3.5, Wtcom.dll is not
> found ... But where is this dll ???
>
> Awaiting, thanks...
>
> GG, somewhere in France...
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20171121/a5d1b365/attachment-0001.html>