[WT-support] SunSDR2 Support

Bob Wilson, N6TV n6tv at arrl.net
Tue Jul 26 19:04:05 CEST 2016


On Tue, Jul 26, 2016 at 4:56 AM, f6ira <f6ira at sfr.fr> wrote:

> Hi Someone have SunSDR2 setup experimentation for this RIG as SO1R or SO2V
> with wt?
>

This SDR seems to support SO1V and SO2R, not SO2V.  Win-Test doesn't
support SO2V.

This 54-page PDF file explains how to configure the SDR:

http://sunsdr.eu/?smd_process_download=1&download_id=574


First you have to install the required software (ExpertSDR2, VSP Manager,
and maybe Virtual Audio Cable).

On page 15 is explains how to use VSP Manager to create a COM port pair,
with COM5 for the radio software, and COM6 for CAT control of the radio by
logging software.

On page 39 it describes how to use the CAT Tab of ExpertSDR2 software to
define COM5 as the CAT port, TS-480 emulation, with DTR for CW, RTS for PTT.

On page 44 it shows how to set up N1MM to use COM6 for CAT, CW, and PTT.

The Win-Test CAT configuration is very similar to N1MM.  Select Options |
Interface configuration.  Press the [Configure...] button next to the
radio's CAT port (e.g. COM6), then set the baud rate as previously defined,
and set DTR to CW, RTS to PTT.

Please let us know if it works.  I do not know if anyone else reading this
list has made the SunSDR2 work with Win-Test, but it seems like it should
work OK.

73,
Bob, N6TV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20160726/710244f4/attachment.html>


More information about the Support mailing list