[WT-support] WT 4.20.0 released

[Bob Wilson, N6TV]

You must upgrade Icom IC-7800 firmware as explained in Release.txt for v
4.20.  Then you will see VFO B in Win-Test.

73,
Bob, N6TV
On Feb 20, 2016 1:22 AM, "Mirko Holte" <dj1aa at web.de> wrote:

> Hello all,
>
> since yesterday I upgraded my WT from 4.19.0 to 4.20.0 and now I have a
> problem with the serial communication.
> Only in 1 direction the transceiver controll is working. If I chance the
> frequency on the VFO, WT do not get this information.
> I f I choose a call in the bandmap and click, the transceiver change the
> frequency. Also Band UP and DOWN commands
> from WinTest to the TRX is working but no feedback from Transceiver back
> to Wintest.
>
> I want to start in the ARRL contest this night, but I did not found the
> configuration problem. Double check with my logprogram
> HAM-Office works fine, no problem here. So I decided to try a WT fallback
> to 4.19.0 and what a surprice, now all is OK again
> but I lost 1,5 hours and the DX conditions to US are very bad I believe.
> All signals very low here in DL on a big optibeam.
>
> My station:  ICOM IC7800, Microham MK2R+, Wintest 4.20.0 since yesterday
> (with problems)
> After downgrade back to version 4.19.0 the communication problem is away.
>
> Any suggestions regarding the WT problem version wt4.20.0 ?
>
> Thanks Mirko, DJ1AA
>
>
> -----Ursprüngliche Nachricht----- From: Laurent HAAS - F6FVY
> Sent: Sunday, January 17, 2016 4:57 PM
> To: support at win-test.com
> Subject: [WT-support] WT 4.20.0 released
>
> Hi
>
> Win-Test version 4.20.0 is now available for download:
>
> http://download.win-test.com/v4/bin/wt-4.20.0.exe [full, 14 MB]
> http://download.win-test.com/v4/bin/wt-4.20.0-update.exe [update, 6.5 MB]
>
> As usual, use your login / password to access the download area.
>
> ----------------------------
>
>
> 4.20.0 (Jan. 17, 2016)
>
> - Radios : IC-7600, IC-7800, IC-7850, IC-7851 : New code for a better
>   management of these radios. It requires the latest firmwares.
>   Tnx N6TV, K3LR, K9LA (Icom America), ICOM France, HRO Sunnyvale (CA),
>   AA6W and K6SSJ.
>
> - Radios : FT-991 added. Tnx N6TV, SP5IOU.
>
> - Radio Wnd : New option to enable / disable the RIT display, when
>   applicable. Tnx F5LIW, K3LR.
>
> - Bugfix : ARRL 10m : Tools / Check Bad Exchanges was broken.
>
> - PACC contest : Rules 2016. Dutch provinces (for non-PA) and DXCC and
>   call areas (for PA) now count as mult per band and per mode when
>   taking part in Mixed category. Tnx PA5M.
>
> - French Championship : Rules 2016 applied. Tnx F5LEN.
>
> - Radio Wnd : Ctrl-Up / Ctrl-Down in the list view doesn't lose cursor
>   when a Q is entered. Tnx K5KG. (Task #364).
>
> - Bugfix : Under some circumstances, the default contest log names
>   were broken.
>
> - LZ DX Contest : New rules 2015 for LZ stations applied. The only
>   limitation is the 10-min rule for the M/S station, which is always
>   applied for band *or mode* change, independently of the status of
>   the station (RUN or MULT). Tnx LZ2CJ.
>
> - ARRL SS : Default CW msgs updated. Tnx W2GD, N6TV.
>
> - ARRL SS : Added new message variable $PREC (precedence) for the ARRL
>   Sweepstakes, automatically determined from entry class and power
>   level. Tnx N6TV.
>
> - Bugfix : ARRL SS : Correct label for the sections field.
>
> - Log check reports : QSO with own callsign are now ignored.
>   Tnx FY5KE.
>
> - Status wnd (Alt-J) : X-min rule timers now ignore QSO with own
>   callsign. Tnx FY5KE.
>
> - Check country wnd (F10) : QSO with own callsign are now ignored.
>   Tnx FY5KE.
>
>
> ---------------------
>
> 73
>
> Larry - F6FVY
>
> --
> Remember Jan. 7 2015 - #JeSuisCharlie
> Remember Nov. 13 2015 - #JeSuisParis
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20160220/6af06ccf/attachment.html>