[WT-support] Win test and LOTW dramas

John A. Ross [GM1BSG] gm1bsg at gm6nx.com
Tue May 12 22:33:23 CEST 2015


Laurent

I have never seen the issue Billy describes and it is me that uploads the
contest dumps from WT for the local club here to Clublog, lotw etc and never
a problem (except bad log calls).

<QSO_DATE:8>20140720 <TIME_ON:6>230248 <MODE:3>SSB <BAND:3>20m
<FREQ:6>14.265 <RST_SENT:2>59 <RST_RCVD:2>59 <TX_PWR:3>400 <EOR>

That was from 4.13, Billy will be using 4.16 as he only just registered it
after using it at the club so much in contest.

I just tried a new DXP mode log in 4.16 and for me its fine, so I have no
idea what Billy has done but 

<MODE:2>CW <BAND:3>20m <FREQ:6>14.055 <RST_SENT:3>599 <RST_RCVD:3>599 <EOR>
<MODE:2>CW <BAND:3>40m <FREQ:5>7.046 <RST_SENT:3>599 <RST_RCVD:3>599 <EOR>
<MODE:3>SSB <BAND:4>160m <FREQ:5>1.840 <RST_SENT:2>59 <RST_RCVD:2>59 <EOR>
<MODE:3>SSB <BAND:3>80m <FREQ:5>3.775 <RST_SENT:2>59 <RST_RCVD:2>59 <EOR>

But if it can be broken, I am sure Billy can do it :-D

John

> -----Original Message-----
> From: Laurent HAAS - F6FVY [mailto:f6fvy at free.fr]
> Sent: 12 May 2015 19:24
> To: support at f5mzn.org
> Subject: Re: [WT-support] Win test and LOTW dramas
> 
> Hi
> 
> Le 12/05/2015 19:36, John A. Ross [GM1BSG] a écrit :
> 
> > Never had an issue from WT ADIF to LoTW with bandplans either default
> > or setup.
> 
> The ADIF code hasn't changed for years, and I cfm the freq is output as :
> 
> <FREQ:6>14.038  (for example) which is compatible with LoTW.
> 
> So, the question now is how Billy's log can write the freq as "14000"
> instead of "14.000".
> 
> What gives an Alt-F on a QSO which is refused by LoTW ? Is the freq
correct
> (should be 14000.0 or 7000.0 etc. - it's expressed in kHz) ?
> 
> And BTW, what Win-Test version are you using ?
> 
> 73
> 
> Larry - F6FVY
> 
> --
> Remember Jan. 7 2015 - #JeSuisCharlie
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support



More information about the Support mailing list