[WT-support] Mode code on .EDI VHF logs
Claudio Veroli
claudio.veroli at alice.it
Mon Aug 10 18:00:52 CEST 2015
Hi all
we are using WT for VHF contests logging (ver 4.17) .
In the .edi REG1TEST exports the QSO mode code (ex. 1=SSB, 2=CW) is not formatted.
There is always a blank.
This is a problem for many check log programs e we need to fill this info manually.
Is it possible to fix the problem in next versions of WT?.
73 de Claudio I4VEQ
Here is a short table of the .edi REG1TEST file requirments:
All fields in the QSO record is written on the same line, and ending with ASCII characters 13 and 10 (CR LF).
Field Maximum length
Date = YYMMDD, 6 characters 6
Time = UTC, 4 characters, with leading zeros 4
Call = 3 to 14 characters 14
Mode code = 0 or 1 character 1
Sent-RST = 0 or 2 or 3 characters 3
Sent QSO number = 0 or 3 or 4 characters, with leading zeros 4
Received-RST = 0 or 2 or 3 characters 3
Received QSO number = 0 or 3 or 4 characters, with leading zeros 4
Received Exchange = 0 or 1 to 6 characters (see also PExch) 6
Received WWL = 0 or 4 or 6 characters, World Wide Locator 6
QSO points = 1 to 6 characters, including bandmultiplier 6
New-Exchange = 0 or 1 character, "N" if QSO is a new exchange 1
New-WWL = 0 or 1 character, "N" if QSO is a new WWL 1
New-DXCC = 0 or 1 character, "N" if QSO is a new DXCCL 1
Duplicate-QSO = 0 or 1 character, "D" if contact is a duplicate QSO 1
Mode code
The mode code is used to show which modes were used for the QSO. Below is a list of the code with corresponding modes.
Mode code TX mode RX mode
0 non of below non of below
1 SSB SSB
2 CW CW
3 SSB CW
4 CW SSB
5 AM AM
6 FM FM
7 RTTY RTTY
8 SSTV SSTV
9 ATV ATV
If the mode is not important it can be left blank, i.e. not stated in rules/invitation.
Example:
WRONG (WT 4.17)
150804;1703;IZ5HQB;;59;001;59;000;;JN53NS;80;;N;N;
CORRECT
150804;1703;IZ5HQB;1;59;001;59;000;;JN53NS;80;;N;N;
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20150810/2bcc02c9/attachment.html>
More information about the Support
mailing list