[WT-support] Alternating CQ in mixed mode issue

Bengt Christensen sm6fud at telia.com
Fri Nov 21 20:04:16 CET 2014


Anton, it works with me.
If there is no wav file in the play folder the SSB radio will not TX.
Also check {operator} settings in 'configure' and CTRL-O.

73 - Bengt SM6FUD


------ Originalmeddelande ------
Från: "Anton Koval, MW0EDX" <m0edx at yahoo.com>
Till: "support at win-test.com" <support at win-test.com>
Skickat: 2014-11-21 08:16:54
Ämne: [WT-support] Alternating CQ in mixed mode issue

>I have set up the DX Doubler to work with 2 Icoms via 1 PC for advanced 
>SO2R.
>
>Single mode - SSB or CW is working fine, but when i set rig 1 for SSB 
>on say 40 m and rig 2 for CW on say 80 m, WT only sends, when pressed 
>F1, only CQ from rig 1 and stops.
>
>So how can i use the alternating  CQs in the advanced SO2R  on 
>different bands in mixed mode then ?
>
>Thanks
>MW0EDX
>
>Sent from Yahoo Mail on Android
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20141121/056b0ae9/attachment.html>


More information about the Support mailing list