[WT-support] WtRotators and Yaesu rotator

[Bob Wilson, N6TV]

Are you using wtRotators 1.4.2?  Earlier releases didn't support COM ports
over COM 9.

Try http://download.win-test.com/wtRotators/nightly/wtRotators_dev.zip

73,
Bob, N6TV

On Wed, Nov 5, 2014 at 11:26 PM, Guido Tedeschi <guidoted at gmail.com> wrote:

> I will try it, thanks.
> 73 de Guido, ik2bcp
>
> Il giorno 06/nov/2014, alle ore 01:38, "Bob Wilson, N6TV" <n6tv at arrl.net>
> ha scritto:
>
> I had a similar issue with wtRotators that I never figured out.  I could
> never get the first rotator controller added to wtRotators to work.  The
> 2nd and 3rd rotators worked fine.  Did you try defining a second rotator?
>
> 73,
> Bob, N6TV
>
> On Wed, Nov 5, 2014 at 4:06 PM, Guido Tedeschi <guidoted at gmail.com> wrote:
>
>> I've developed a rotator interface that emulates the Yaesu proctocol
>> (both GS232A and GS232B).
>> It works fine with all softwares but with WtRotators no direction is
>> shown, only ---.-
>> The communication is fine at 4800 baud, because my interface receives
>> correctly the L, R, A and Mxxx commands sent by WtRotators, but neither
>> +XXX (GS232A) or AZ=XXX (GS232B) commands seem to be accepted as correct
>> azimuth to be displayed by WtRotators.
>> What should be the syntax of the direction data sent to WtRotators?
>> Thanks and 73
>> Guido, ik2bcp
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20141106/b788ca91/attachment.html>