[WT-support] WtRotators and Yaesu rotator

[Bob Wilson, N6TV]

I had a similar issue with wtRotators that I never figured out.  I could
never get the first rotator controller added to wtRotators to work.  The
2nd and 3rd rotators worked fine.  Did you try defining a second rotator?

73,
Bob, N6TV

On Wed, Nov 5, 2014 at 4:06 PM, Guido Tedeschi <guidoted at gmail.com> wrote:

> I've developed a rotator interface that emulates the Yaesu proctocol (both
> GS232A and GS232B).
> It works fine with all softwares but with WtRotators no direction is
> shown, only ---.-
> The communication is fine at 4800 baud, because my interface receives
> correctly the L, R, A and Mxxx commands sent by WtRotators, but neither
> +XXX (GS232A) or AZ=XXX (GS232B) commands seem to be accepted as correct
> azimuth to be displayed by WtRotators.
> What should be the syntax of the direction data sent to WtRotators?
> Thanks and 73
> Guido, ik2bcp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20141105/94447b4b/attachment.html>