[WT-support] WIN TEST 4.12.0 versus MICROHAM microKEYER

[Fred Handscombe]

That combination, except I am using the Digi Keyer 2 (which I think uses the same MicroHam router software, ver 8.5.3), works perfectly with a K3

I have COM5 set for CAT
COM7 for FSK with PTT ticked
COM8 for 2nd incidence of MMTTY for listening split (PTT ticked) so you can TX from either, the radio actually takes care of the split
COM6 is Winkey (irrelevant here)

COM7 or 8 set correctly in MMTTY

Get it working in MMTTY only first

If you have a K3 and use AFSK make sure you are using the correct input port (back panel for AFSK) on the K3 and have increased the line level input setting as it defaults to ZERO and you get no TX!!

GL

73 Fred
A65BD

From: Luis Teixeira 
Sent: Wednesday, June 25, 2014 11:20 AM
To: support at f5mzn.org 
Subject: [WT-support] WIN TEST 4.12.0 versus MICROHAM microKEYER

I've been trying to configurate WT v 4.12.0 with microham microkeyer, but with no sucess so far.
Does anyone have the correct set up for this combination, please? On RTTY mode I'm using MMTTY...
I would appreciate your help.
Best 73 de Luis, CT4NH



--------------------------------------------------------------------------------
_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140625/16e96c12/attachment.html>