[WT-support] How to run 2 contests in WT network?

[Dennis McAlpine]

That was one of the clearest comments I have seen.  It was as clear as mud
in a thunderstorm.  Of coure, it might make more sense if I used WinTest
rather than n1mm.  BTW, any interest in operating CQWW CW from PJ4?

 

73,

 

Dennis, K2SX  

 

  _____  

From: support-bounces at f5mzn.org [mailto:support-bounces at f5mzn.org] On Behalf
Of Ulf, DL5AXX
Sent: Saturday, April 05, 2014 8:25 AM
To: support at win-test.com
Subject: Re: [WT-support] How to run 2 contests in WT network?

 

Hi Tonno,

if you don't want to have 2 Wintest-instances on one fo the computers, it's
quite easy.
Use for group 1 port 8871 in the network configuration and for group 2 port
9871 (default). Now you just have to start wtDxTelnet on 2 of the computers,
where one is feeding the computers of group 1 on port 8871 and the other one
group 2 on port 9871.

It will get more complicted, if both group's have to share one computer.
Then you have to start one WinTest-instance with a second wt.ini
(http://docs.win-test.com/wiki/Other_Files).

Hope this helps...

73 Ulf, DL5AXX

 

Am 05.04.2014 14:04, schrieb Tonno Vahk:

I have not found a good solution. 

 

Say I have 2 groups of ops running two different contests as MS at the same
time. Both with WT and both with 2 networked PC. So in total 4 PCs, all need
internet for cluster.

 

So I need to cut the network between the two groups while both would retain
internet. How to do it??

 

I cannot use "Packet Sharing Only" obviously as then the QSOs won't be
passed inside of both groups.

 

73

Tonno






_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140406/0b673b06/attachment.html>