[WT-support] Missing band in spot window and band map

[Bob Wilson, N6TV]

   1. Switch radio and Win-Test to 160m
   2. Right Click on Bandmap
   3. Select *Properties*
   4. At the bottom, change "Current band plan in use" to *Default*
   5. Click *[Setup...]*
   6. Make sure CW is selected and set the range 1800-1850 or whatever you
   need

Spots outside of range will not show up.

If using the *List* view of the bandmap, right click, *Display Options ->
Mutlipliers Only *(uncheck).  Same for the Alt-A (DX Announcements) window.

Remember also that if you are doing SH/DX 160 to look at old 160m spots, if
the spots are "older" than "30 minutes" (or whatever timeout is set), they
will *not* show up in any of the windows (see timeout settings in Bandmap
Properties).

73,
Bob, N6TV

On Fri, Nov 22, 2013 at 1:08 PM, Peter Voelpel <dj7ww at t-online.de> wrote:

>   Have a problem to get 160m cluster input to Wintest.
>
> The spots are visible on the DX-cluster monitor window but not on the
> DX-spots window and the band map window.
>
> I resetted all filters on my standard cluster connection and also tried
> with two other connections.
>
> No chance to get the cluster spots into Wintest, all other bands are fine.
>
>
>
> Usually I work unassisted in contests so did not try before to use the
> cluster.
>
>
>
> Any suggestions?
>
>
>
> 73
>
> Peter
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20131122/8d6cdea2/attachment.html>