[WT-support] MK2 + monitor recording ?

Bob Wilson, N6TV n6tv at arrl.net
Wed Jan 30 18:52:32 CET 2013


This doesn't sound like a Win-Test issue, but a limitation of the radio.

I guess by "MK2" you are referring to the microHAM microKEYER II.  I assume
the "LINE" LED is lit and you're trying to record the line level audio
output of a radio like the FT-1000MP, using the LINE level "microHAM Codec".

Unfortunately the FT-1000MP and other radios do not mix your CW sidetone or
SSB monitor into the line level audio output jack (LINE OUT).  You can
verify this by listening to the LINE OUT jack with headphones while you are
transmitting.

Instead of using the line out jack, you can try recording off a parallel
headphone jack.  You may need an impedance pad to prevent distortion, or
you may be able to get decent audio recording (both your sidetone and the
signals), but adjusting the input levels using the mixer controls provided
by the Router.

So what type of radio are you connecting to the microKeyer II?

73,
Bob, N6TV

On Wed, Jan 30, 2013 at 1:18 AM, Patrick EGLOFF <pegloff at gmail.com> wrote:

> Hi folks !
>
> Is there a way to record the CW (and/or SSB) monitor with Wintest recorder
> and a MK2 ? It's a bit boring not having my own transmission recorded with
> the receiver audio...
>
> Apparently the monitor on the MK2 is only for a "local" monitoring ?
>
> Thanks,
>
> --
> Patrick Egloff - TK5EP
> email : pegloff at gmail.com
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130130/2c81e1fb/attachment.html>


More information about the Support mailing list