[WT-support] Fwd: SO2R in SSB with Win-Test

[Filipe Lopes]

Looks like W-T reflector didn't send my post because the size of it was too
big, hope it goes now.


---------- Mensagem encaminhada ----------
De: Filipe Lopes <ct1ilt at gmail.com>
Data: 16 de Março de 2012 00:43
Assunto: Re: [WT-support] SO2R in SSB with Win-Test
Para: "Bob Wilson, N6TV" <n6tv at arrl.net>
Cc: support at win-test.com


Please check my comments to your suggestions.

No dia 16 de Março de 2012 00:29, Bob Wilson, N6TV <n6tv at arrl.net> escreveu:

On Thu, Mar 15, 2012 at 4:35 PM, Filipe Lopes <ct1ilt at gmail.com> wrote:
>
>> I am using u2R with latest version of win-test and my questions are
>> regarding the focus when TX on radio 1.
>>
>> Right now I have win-test configured as I usually have for CW but when I
>> transmit on Radio 1 I hear my voice and u2R doesn't go to Radio 2 while
>> transmitting on radio 1.
>>
>> I am using the radio memories to transmit audio and these memories are
>> assigned to F1 F2 etc
>>
>> The Scenarios are just like I usually have for CW
>>
>> Am I missing something here? why doesnt the u2R switch the Radio 2 while
>> transmitting SSB on radio 1?
>>
>
> What is in the F1 message for the Advanced Scenario that you have
> selected?  It should be something like this (copied from WT manual):
>
> F1 = $RESET $R2R2 $F1 $RESET $R1R1 $LATCH
>
>
This is exactly what I have



> When the operator pushes the F1 key, Win-Test will reset to automatic
> control any manual audio setting in
>  case there was one, switch the headphone to radio2 only, transmit the
> content of the voice keyer F1, reset to
> automatic control in case any manual audio control while F1 was being
> sent, and switch the headphones to
> radio1 only. The latch command sets the Latch Mode in case the operator
> uses the microphone during the next
> moment of the QSO, and wants to listen to the secondary radio while
> talking on the microphone.
> The user can configure the scenarios in the menu Operating | Modify the
> scenarios. There is a
> wizard with five pre-defined scenarios, but the user can change them and
> use his scenarios according to his
> skill and his SO2R expertise.
>
>
I added the $LATCH and activated it on the u2R but nothing seems to happen
after this change


>
> But there also seems to be a big difference between the u2R and the MK2R+.
>  I couldn't get the u2R to obey the headphone switching commands $R2R2
> etc., even on CW.
>

It is working perfectly in CW, I never tried it in SSB and now I am getting
this problem.

Considering only SSB for now, I noticed that when I press F1, the RADIO 1
transmits but I don't see any PTT signal on in u2R panel and in CW the PTT
signal is there. Could it be this? I tried pressing the footswitch after
pressing F1 but nothing seems to happen.


> First, make sure the u2R is in "AUTO" mode (yellow LED) for both TX and RX:
>

Checked, I always have in AUTO mode


>
> A long press of BOTH R1 and R2 at the same time enables automatic
> headphone switching (AUTO mode).
>
>
> If that doesn't fix it, go to the microHAM Router, select the Audio tab,
> and choose how you want it to work:
>
>
>
> Select the Latch options to put both ears on R2 when R1 transmits, and
> vice versa.  Decide if you want it to work that way for "Manual TX"
> (speaking into mic.) as well.
>
> The microHAM u2R seems to be in control of the headphones at all times
> whenever you transmit; it doesn't let software like Win-Test take over.
> The MK2R+ doesn't work that way.
>
> 73,
> Bob, N6TV
>

Could it be the PTT signal is being interpreted by Win-Test or u2R?

-- 
Regards/Cumprimentos,
Filipe Lopes CT1ILT aka CR6K
http://www.rep.pt/ct1ilt





-- 
Regards/Cumprimentos,
Filipe Lopes CT1ILT aka CR6K
http://www.rep.pt/ct1ilt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20120316/f9404c7f/attachment.html>