[WT-support] XP + MicroHAM problem

Joe Subich, W4TV lists at subich.com
Thu Feb 23 16:19:17 CET 2012


> In this point, I wasn´t able to figure out a difference between the
> MKII and the MK2R+.

There is no difference in the microHAM Control Protocol (responsible
for communication between Win-Test and the microHAM DVK) in MK, MK II,
MK2R/MK2R+ or micro2R.  The DVK should operate the same in all four
interfaces.

73,

    ... Joe, W4TV


On 2/23/2012 10:00 AM, Matthias Jelen wrote:
> Hi Bob,
>
> I can confirm what Simon reports.
>
> But also with MK2R+ I can use the built-in voicekeyer, playback with
F1 etc. and recording with SHIFT + F1 - no problem here. In this point,
I wasn´t able to figure out a difference between the MKII and the MK2R+.
>
> 73,
>
>
> Matthias, DK4YJ
>
> -------- Original-Nachricht --------
>> Datum: Thu, 23 Feb 2012 01:11:20 -0800
>> Von: "Bob Wilson, N6TV"<n6tv at arrl.net>
>> An: Simon Schelkshorn<simon at schelkshorn.de>
>> CC: support at win-test.com
>> Betreff: Re: [WT-support] XP + MicroHAM problem
>
>> On Feb 23, 2012 1:02 AM, "Simon Schelkshorn"<simon at schelkshorn.de>  wrote:
>>> That is wrong! I have used the MKII serveral times as an external
>> Vocie-Keyer in the past and was able to
>>> record the messages just by pressing Shift-Fx.
>>
>> OK, thanks.  I only have the MK2R+, so maybe the MKII works differently.
>>
>>> Also here, that should work! I know that there is sometimes some
>> unpredictable behaviour with the MKII
>>> but basically when using the MKII built in soundcard for the contest
>> recorder the line input should be automatically
>>> selected. When using it together with the internal DVK is should
>> automatically switch over to the microphone
>>> when pressing Shift-Fx to record a message and then back to the line
>> input. Of course when playing back a
>>> message the recorded audio will be muted during that time.
>>
>> I don't understand exactly how that could work unless Win-Test used
>> special
>> protocol commands to switch microHAM audio inputs back and forth.
>>
>>> I will try to test again
>>> this weekend when in CQ160 SSB. If everything works as described above,
>> I
>> will make some screenshots
>>> to put in the wiki.
>>
>> That would be very helpful Simon, thank you.
>>
>> 73,
>> Bob, N6TV
>


More information about the Support mailing list