[WT-support] Spotgrabbing in RTTY

[Bob Wilson, N6TV]

I think the easiest way around this is to use OmniRig rather than
Win-Test's built-in FT-1000 support.

   1. Exit Win-Test
   2. Download and install and configure OmniRig
   <http://www.dxatlas.com/omnirig>for your radio(s).
   3. Restart Win-Test
   4. SETUP [Enter]
   5. Change Radio type from FT-1000MP to OmniRig
   6. Uncheck the COM port that Win-Test was using to control the radio (it
   will now be owned by OmniRig)
   7. Click *OK* and test
   8. If the radio still switches to the wrong RTTY mode, edit C:\Program
   Files\Afreet\OmniRig\Rigs\FT1000.ini and swap the commands issued by the
   PM_DIG_L and PM_DIG_U entries

73,
Bob, N6TV

On Sat, Feb 11, 2012 at 10:04 AM, SM6FUD <sm6fud at telia.com> wrote:

> **
> Sorry for this thingy but I rather make a fool of myself by asking and
> have it right instead of mucking myself up with the software ending in a
> total collapse...i've
>
> This issue must have been on here before so please forgive my lazy
> eagerness.
> I can't get the spot grabbing to work as I prefere to.
> Radio is in LSB due to the filter passband and my hearing accomodation.
>
> Grabbed spot puts radio in USB each and every time. There must be some
> small square somewhere ot fill in or de-fill...
>
> I use MMTTY with 1275Hz which is well for my couple of FT-1kD's.
>
> Spot window isn't my closest friend here, though. Anyone having the
> patience explain how to work around this? I would love to have the spots
> going right into my radio like right on the spot (laughing here please).
>
> Best regards and happyt RTTYing!
> - 8S6E in WPX
> - Bengt
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20120211/2c5ed8cc/attachment.html>