[WT-support] DX Doubler and SO2Rxlat question

[Bjorn LB1GB]

Scott and Bob,

After applying the settings exactly as the article described,
everything works fine. Thank you!

73 Bjorn

On 4 September 2011 15:37, K0DQ <k0dq at analog.org> wrote:
> Bjorn,
>
> Just saw this.
>
> Go to Options| OTRSP configuration and make sure the top box "use events
> sent by the device for PTT synchronization" is UNCHECKED.
>
> Let use know if that and using the settings in the article don't work.  I
> have this setup working on several computers - laptops and desktops - from
> WINXP to VISTA to WIN 7 (64 bit).
>
> Scott, K0DQ / A92Q
>
> ------------------------------
>
> Message: 3
> Date: Sun, 4 Sep 2011 07:02:31 +0200
> From: Bjorn LB1GB <lb1gb at la8w.com>
> To: support at win-test.com
> Subject: Re: [WT-support] DX Doubler and SO2Rxlat question
> Message-ID:
>        <CANduxt_AhZC2kpq556HByAHWP_vr_nK7rQ3KB9r_azPDj6zQaQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> On 4 September 2011 00:35, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
>> On Sat, Sep 3, 2011 at 2:05 PM, Bjorn LB1GB <lb1gb at la8w.com> wrote:
>>
>>> We got DX Doubler and SO2Rxlat working with Win-Test in SO2R Adv mode.
>>> Scenarios work except for sticking to RX Radio 2 if F1-msg interrupted by
>>> ESC.
>>>
>>
>> Please see if open Task
> #305<http://flyspray.win-test.com/index.php?do=details&id=305>describes your
> issue.  Are you using a WinKey?  Are you using REPEAT mode?
>>
>
> Never tried it with the REPEAT function. We don't have a Winkey. 1 paddle to
> each radio which we hardly use.
>
>>
>> Problem two: Like I said, all work fine. Both TX and RX(expect the above)
>>> is switching according to scenarios, but the virtual TX LED's in the
> second
>>> radio window doesn't lit. Is this normal or is it a way to make them show
>>> which TX is transmitting?
>>>
>>
>> This is not normal.  The Red TX "LED" should always light to indicate
> which
>> radio is transmitting messages.  Select Advanced SO2R mode.  Even then,
> the
>> RED indicators do not always apply if you are using REPEAT mode.  Type
> NORPT
>> to disable REPEAT mode.  Also, if you press CapsLock and then try to send
>> with the paddles on the 2nd radio, that will not work until you press a
> key
>> like F4 to send a message; the paddles always connect to the last radio
> that
>> sent a Win-Test message.
>>
>> Did you follow all the details described in K0DQ's NCJ article for using
>> Win-Test with the SO2RXlate ?
>>
>> See http://www.ncjweb.com/NCJ-JulAug-Redd-BonusContentFinal.pdf
>>
>> I never scrolled that far down in the document. Had limited time and was
> stressing(not a good combination while setting up the station, I know :-))
> Since hardware setup was not in the beginning of the document, I thought it
> wasn't there :-/ I will go through the setup again.
>
> How are you telling Win-Test to switch the TX radio?  COM port pin or LPT
>> pin?
>>
>> COM port, but I see from the document you directed me to that I have a few
> settings off.
>
>
>> Does the problem happen on both phone and CW?
>>
>> Don't know, only tried CW.
>
>
>> If you still can't figure it out, please send me:
>>
>> Your .wt4 (log) file:  File | Explore | /log directory
>> Your wt.ini file:  File | Explore | /cfg directory
>> Your SO2R_Advanced.ini file:  File | Explorer | /cfg directory
>>
>> 73,
>> Bob, N6TV
>>
>
> Thank you Bob. I'll get back to you after checking the setup again.
>
> 73 Bjorn LB1GB/LN8W
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.f5mzn.org/pipermail/support/attachments/20110904/112650dc/atta
> chment-0001.html>
>
> ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at f5mzn.org
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> End of Support Digest, Vol 85, Issue 3
> **************************************
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>