[WT-support] DX Doubler and SO2Rxlat question

[K0DQ]

Bjorn, 

Just saw this.  

Go to Options| OTRSP configuration and make sure the top box "use events
sent by the device for PTT synchronization" is UNCHECKED.

Let use know if that and using the settings in the article don't work.  I
have this setup working on several computers - laptops and desktops - from
WINXP to VISTA to WIN 7 (64 bit).

Scott, K0DQ / A92Q

------------------------------

Message: 3
Date: Sun, 4 Sep 2011 07:02:31 +0200
From: Bjorn LB1GB <lb1gb at la8w.com>
To: support at win-test.com
Subject: Re: [WT-support] DX Doubler and SO2Rxlat question
Message-ID:
	<CANduxt_AhZC2kpq556HByAHWP_vr_nK7rQ3KB9r_azPDj6zQaQ at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

On 4 September 2011 00:35, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> On Sat, Sep 3, 2011 at 2:05 PM, Bjorn LB1GB <lb1gb at la8w.com> wrote:
>
>> We got DX Doubler and SO2Rxlat working with Win-Test in SO2R Adv mode.
>> Scenarios work except for sticking to RX Radio 2 if F1-msg interrupted by
>> ESC.
>>
>
> Please see if open Task
#305<http://flyspray.win-test.com/index.php?do=details&id=305>describes your
issue.  Are you using a WinKey?  Are you using REPEAT mode?
>

Never tried it with the REPEAT function. We don't have a Winkey. 1 paddle to
each radio which we hardly use.

>
> Problem two: Like I said, all work fine. Both TX and RX(expect the above)
>> is switching according to scenarios, but the virtual TX LED's in the
second
>> radio window doesn't lit. Is this normal or is it a way to make them show
>> which TX is transmitting?
>>
>
> This is not normal.  The Red TX "LED" should always light to indicate
which
> radio is transmitting messages.  Select Advanced SO2R mode.  Even then,
the
> RED indicators do not always apply if you are using REPEAT mode.  Type
NORPT
> to disable REPEAT mode.  Also, if you press CapsLock and then try to send
> with the paddles on the 2nd radio, that will not work until you press a
key
> like F4 to send a message; the paddles always connect to the last radio
that
> sent a Win-Test message.
>
> Did you follow all the details described in K0DQ's NCJ article for using
> Win-Test with the SO2RXlate ?
>
> See http://www.ncjweb.com/NCJ-JulAug-Redd-BonusContentFinal.pdf
>
> I never scrolled that far down in the document. Had limited time and was
stressing(not a good combination while setting up the station, I know :-))
Since hardware setup was not in the beginning of the document, I thought it
wasn't there :-/ I will go through the setup again.

How are you telling Win-Test to switch the TX radio?  COM port pin or LPT
> pin?
>
> COM port, but I see from the document you directed me to that I have a few
settings off.


> Does the problem happen on both phone and CW?
>
> Don't know, only tried CW.


> If you still can't figure it out, please send me:
>
> Your .wt4 (log) file:  File | Explore | /log directory
> Your wt.ini file:  File | Explore | /cfg directory
> Your SO2R_Advanced.ini file:  File | Explorer | /cfg directory
>
> 73,
> Bob, N6TV
>

Thank you Bob. I'll get back to you after checking the setup again.

73 Bjorn LB1GB/LN8W
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.f5mzn.org/pipermail/support/attachments/20110904/112650dc/atta
chment-0001.html>

------------------------------

_______________________________________________
Support mailing list
Support at f5mzn.org
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support


End of Support Digest, Vol 85, Issue 3
**************************************